Reported by: booster@wolke7.net
Date: Sun, 25 Sep 2011 15:51:02 UTC
Severity: important
Tags: moreinfo, patch, upstream
Found in versions linux-2.6/2.6.32-39, 2.6.32-35squeeze2, linux-2.6/3.1.1-1
Fixed in version 3.2.6-1
Done: Jonathan Nieder <jrnieder@gmail.com>
Bug is archived. No further changes may be made.
Forwarded to http://thread.gmane.org/gmane.linux.network/212958
View this report as an mbox folder, status mbox, maintainer mbox
Report forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Sun, 25 Sep 2011 15:51:05 GMT) (full text, mbox, link).
Acknowledgement sent
to booster@wolke7.net:
New Bug report received and forwarded. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sun, 25 Sep 2011 15:51:05 GMT) (full text, mbox, link).
Message #5 received at submit@bugs.debian.org (full text, mbox, reply):
Package: linux-2.6
Version: 2.6.32-35squeeze2
Severity: important
-- dmesg output when error occured:
[10547.092995] r8169: eth0: link up
[10553.286740] r8169: eth0: link up
[10715.593791] ------------[ cut here ]------------
[10715.593832] WARNING: at
/build/buildd-linux-2.6_2.6.32-35squeeze2-i386-XoyoyB/linux-2.6-2.6.32/debian/build/source_i386_none/net/
sched/sch_generic.c:261 dev_watchdog+0xbd/0x15d()
[10715.593853] Hardware name: CM-iAM/SBC-FITPC2i
[10715.593865] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[10715.593877] Modules linked in: nfs fscache nls_utf8 sg sr_mod cdrom
usb_storage isofs udf crc_itu_t sco bridge stp bnep l2cap blu
etooth parport_pc ppdev lp parport cpufreq_userspace
cpufreq_conservative cpufreq_stats cpufreq_powersave nfsd lockd nfs_acl
auth_rp
cgss sunrpc exportfs fuse ext2 coretemp acpi_cpufreq loop rt2870sta(C)
arc4 ecb snd_usb_audio rt2800usb snd_usb_lib rt2x00usb snd_se
q_midi snd_hda_codec_realtek snd_hda_intel rt2x00lib snd_seq_midi_event
mac80211 snd_hda_codec uvcvideo cfg80211 snd_rawmidi snd_pcm
snd_hwdep snd_seq usbhid videodev rfkill snd_timer snd_seq_device
psmouse snd crc_ccitt serio_raw evdev i2c_isch cdc_acm v4l1_compa
t soundcore hid battery ac button processor pcspkr snd_page_alloc
i2c_core video output ext4 mbcache jbd2 crc16 sd_mod crc_t10dif at
a_generic pata_sch libata uhci_hcd thermal sdhci_pci sdhci scsi_mod
r8169 ehci_hcd mii mmc_core led_class usbcore nls_base thermal_s
ys [last unloaded: scsi_wait_scan]
[10715.594268] Pid: 0, comm: swapper Tainted: G C 2.6.32-5-686 #1
[10715.594280] Call Trace:
[10715.594309] [<c1030709>] ? warn_slowpath_common+0x5e/0x8a
[10715.594330] [<c11e8eb8>] ? dev_watchdog+0x0/0x15d
[10715.594349] [<c1030767>] ? warn_slowpath_fmt+0x26/0x2a
[10715.594368] [<c11e8f75>] ? dev_watchdog+0xbd/0x15d
[10715.594393] [<c1020039>] ? load_balance_rt+0x0/0x3
[10715.594414] [<c104148a>] ? insert_work+0x71/0x78
[10715.594435] [<c103af4c>] ? run_timer_softirq+0x16a/0x1eb
[10715.594457] [<c10357da>] ? __do_softirq+0xaa/0x156
[10715.594477] [<c10358b7>] ? do_softirq+0x31/0x3c
[10715.594495] [<c1035991>] ? irq_exit+0x26/0x58
[10715.594516] [<c1004699>] ? do_IRQ+0x78/0x89
[10715.594535] [<c10037f0>] ? common_interrupt+0x30/0x38
[10715.594604] [<f7fe20f9>] ? acpi_idle_enter_bm+0x261/0x29c [processor]
[10715.594631] [<c11c69c9>] ? cpuidle_idle_call+0x68/0xbb
[10715.594651] [<c1002388>] ? cpu_idle+0x89/0xa5
[10715.594673] [<c13bf806>] ? start_kernel+0x318/0x31d
[10715.594686] ---[ end trace 74ae8a61fd1c8ad1 ]---
[10715.619380] r8169: eth0: link up
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686
root=UUID=c8369b5c-f8fa-42d3-a640-ed1feff58e85 ro pcie_aspm=off quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 8.856720] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.894044] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
[ 8.895052] usbcore: registered new interface driver cdc_acm
[ 8.895533] cdc_acm: v0.26:USB Abstract Control Model driver for USB
modems and ISDN adapters
[ 9.009516] Linux video capture interface: v2.00
[ 9.096311] cfg80211: Using static regulatory domain info
[ 9.096318] cfg80211: Regulatory domain: US
[ 9.096323] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 9.096331] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 9.096338] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096345] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096352] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096359] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096367] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 9.096619] cfg80211: Calling CRDA for country: US
[ 9.490509] uvcvideo: Found UVC 1.00 device WC060 Series HD Webcam
(177f:0060)
[ 9.493141] input: WC060 Series HD Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[ 9.493393] usbcore: registered new interface driver uvcvideo
[ 9.493544] USB Video Class driver (v0.1.0)
[ 9.837538] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 9.837622] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.840912] phy0: Selected rate control algorithm 'minstrel'
[ 9.842895] Registered led device: rt2800usb-phy0::radio
[ 9.842943] Registered led device: rt2800usb-phy0::assoc
[ 9.842991] Registered led device: rt2800usb-phy0::quality
[ 9.843563] usbcore: registered new interface driver rt2800usb
[ 9.985348] rt2870sta: module is from the staging directory, the
quality is unknown, you have been warned.
[ 9.996976] rtusb init --->
[ 9.997135] usbcore: registered new interface driver rt2870
[ 10.204541] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 10.206514] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 10.794546] usbcore: registered new interface driver snd-usb-audio
[ 11.407776] Adding 3906552k swap on /dev/sda2. Priority:-1 extents:1
across:3906552k
[ 11.825167] loop: module loaded
[ 13.938701] r8169: eth0: link down
[ 13.939194] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.432594] fuse init (API version 7.13)
[ 16.797262] RPC: Registered udp transport module.
[ 16.797269] RPC: Registered tcp transport module.
[ 16.797273] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.098293] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.414527] svc: failed to register lockdv1 RPC service (errno 97).
[ 17.417639] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 17.549776] NFSD: starting 90-second grace period
[ 19.314878] Bluetooth: Core ver 2.15
[ 19.315462] NET: Registered protocol family 31
[ 19.315476] Bluetooth: HCI device and connection manager initialized
[ 19.315492] Bluetooth: HCI socket layer initialized
[ 19.462223] Bluetooth: L2CAP ver 2.14
[ 19.462237] Bluetooth: L2CAP socket layer initialized
[ 19.760566] Bluetooth: RFCOMM TTY layer initialized
[ 19.760578] Bluetooth: RFCOMM socket layer initialized
[ 19.760583] Bluetooth: RFCOMM ver 1.11
[ 20.031845] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.031851] Bluetooth: BNEP filters: protocol multicast
[ 20.117107] Bridge firewalling registered
[ 20.266813] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.266819] Bluetooth: SCO socket layer initialized
[ 20.543047] lp: driver loaded but no devices found
[ 20.640278] ppdev: user-space parallel port driver
[ 96.860129] usb 1-1: USB disconnect, address 2
[ 96.860145] usb 1-1.1: USB disconnect, address 5
[ 96.861262] usb 1-1.3: USB disconnect, address 6
[ 96.891066] usb 1-1.4: USB disconnect, address 7
[ 97.132311] usb 1-1: new high speed USB device using ehci_hcd and
address 9
[ 97.266713] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 97.266731] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 97.266745] usb 1-1: Product: USB2.0 Hub
[ 97.267168] usb 1-1: configuration #1 chosen from 1 choice
[ 97.267922] hub 1-1:1.0: USB hub found
[ 97.269558] hub 1-1:1.0: 4 ports detected
[ 97.540859] usb 1-1.1: new high speed USB device using ehci_hcd and
address 10
[ 97.634837] usb 1-1.1: New USB device found, idVendor=05e3,
idProduct=0608
[ 97.634855] usb 1-1.1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 97.634869] usb 1-1.1: Product: USB2.0 Hub
[ 97.635310] usb 1-1.1: configuration #1 chosen from 1 choice
[ 97.637874] hub 1-1.1:1.0: USB hub found
[ 97.638272] hub 1-1.1:1.0: 4 ports detected
[ 97.712864] usb 1-1.3: new high speed USB device using ehci_hcd and
address 11
[ 97.861587] usb 1-1.3: New USB device found, idVendor=177f,
idProduct=0060
[ 97.861606] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 97.861620] usb 1-1.3: Product: WC060 Series HD Webcam
[ 97.861630] usb 1-1.3: Manufacturer: Sweex
[ 97.862075] usb 1-1.3: configuration #1 chosen from 1 choice
[ 97.864749] uvcvideo: Found UVC 1.00 device WC060 Series HD Webcam
(177f:0060)
[ 97.867683] input: WC060 Series HD Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 98.948819] usb 1-1.4: new full speed USB device using ehci_hcd and
address 12
[ 99.045589] usb 1-1.4: New USB device found, idVendor=03eb,
idProduct=204b
[ 99.045608] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 99.045621] usb 1-1.4: Product: CUL868
[ 99.045630] usb 1-1.4: Manufacturer: busware.de
[ 99.046077] usb 1-1.4: configuration #1 chosen from 1 choice
[ 99.046778] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
[ 146.358948] r8169: eth0: link up
[ 146.359889] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6446.200217] rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
[ 6446.520840] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8310.840938] cfg80211: Calling CRDA for country: DE
[ 8320.957189] wlan0: no IPv6 routers present
[ 9590.696055] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
isofs 24608 0
udf 63002 0
crc_itu_t 1035 1 udf
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
bridge 33051 0
stp 996 1 bridge
bnep 7468 2
rfcomm 25215 0
l2cap 21721 4 bnep,rfcomm
bluetooth 36335 6 sco,bnep,rfcomm,l2cap
cpufreq_userspace 1488 0
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
nfsd 194111 11
lockd 49481 1 nfsd
nfs_acl 1695 1 nfsd
auth_rpcgss 25284 1 nfsd
sunrpc 134944 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 2626 1 nfsd
fuse 44304 1
ext2 46277 1
coretemp 3401 0
acpi_cpufreq 4959 1
loop 9773 0
snd_hda_codec_realtek 163306 1
rt2870sta 326811 0
snd_hda_intel 16831 0
arc4 974 2
snd_usb_audio 50678 0
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_usb_lib 11200 1 snd_usb_audio
ecb 1405 2
snd_seq_midi 3576 0
rt2800usb 24927 0
snd_pcm 47226 3 snd_hda_intel,snd_usb_audio,snd_hda_codec
psmouse 44817 0
uvcvideo 45526 0
snd_seq_midi_event 3684 1 snd_seq_midi
rt2x00usb 5729 1 rt2800usb
snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi
snd_seq 35495 2 snd_seq_midi,snd_seq_midi_event
rt2x00lib 19109 2 rt2800usb,rt2x00usb
mac80211 123746 2 rt2x00usb,rt2x00lib
snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec
cfg80211 87797 2 rt2x00lib,mac80211
rfkill 10280 3 bluetooth,cfg80211
snd_timer 12258 2 snd_pcm,snd_seq
videodev 25569 1 uvcvideo
crc_ccitt 1039 2 rt2870sta,rt2800usb
i2c_isch 2690 0
v4l1_compat 10250 2 uvcvideo,videodev
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
serio_raw 2916 0
i2c_core 12795 2 videodev,i2c_isch
cdc_acm 12582 0
evdev 5609 2
pcspkr 1207 0
snd 34431 10
snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_pcm,snd_rawmidi,snd_seq,snd_hwdep,snd_timer,snd_seq_device
soundcore 3450 1 snd
video 14605 0
button 3598 0
ac 1640 0
snd_page_alloc 5061 2 snd_hda_intel,snd_pcm
battery 3782 0
output 1204 1 video
processor 26343 3 acpi_cpufreq
usbhid 28040 0
hid 50925 1 usbhid
ext4 256968 1
mbcache 3762 2 ext2,ext4
jbd2 56219 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 26021 4
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
pata_sch 1546 4
uhci_hcd 16073 0
thermal 9206 0
r8168 137847 0
sdhci_pci 4589 0
sdhci 12187 1 sdhci_pci
libata 115913 2 ata_generic,pata_sch
thermal_sys 9378 3 video,processor,thermal
ehci_hcd 28749 0
r8169 25294 0
mii 2714 1 r8169
mmc_core 38781 1 sdhci
led_class 1757 2 rt2x00lib,sdhci
scsi_mod 104889 2 sd_mod,libata
usbcore 98865 11
rt2870sta,snd_usb_audio,snd_usb_lib,rt2800usb,uvcvideo,rt2x00usb,cdc_acm,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 3 isofs,udf,usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#iface eth0 inet dhcp
iface eth0 inet static
address 192.168.178.13
netmask 255.255.255.0
network 192.168.178.0
broadcast 192.168.178.255
gateway 192.168.178.1
up ip -6 addr add 2001:4dd0:f934:1000:201:c0ff:fe08:aa31/64 dev eth0
# dns-* options are implemented by the resolvconf package, if
installed
#dns-nameservers 192.168.178.1
#dns-search gkehrer.local
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:01:c0:08:aa:31 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.13/24 brd 192.168.178.255 scope global eth0
inet6 2001:xxxx:xxxx:xxxx:201:c0ff:fe08:aa31/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::201:c0ff:fe08:aa31/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:01:c0:08:aa:32 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:0d:f0:95:86:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global wlan0
5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 2e:61:60:3e:bc:1e brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 27504 342 0 0 0 0 0 0
27504 342 0 0 0 0 0 0
eth0:12385839 32654 0 0 0 0 0 0
5972630 31301 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0
30750 147 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
27679 total packets received
0 forwarded
0 incoming packets discarded
27667 incoming packets delivered
30799 requests sent out
Icmp:
179 ICMP messages received
76 input ICMP message failed.
ICMP input histogram:
destination unreachable: 97
echo requests: 79
echo replies: 3
103 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 97
echo request: 3
echo replies: 3
IcmpMsg:
InType0: 3
InType3: 97
InType8: 79
OutType0: 3
OutType3: 97
OutType8: 3
Tcp:
15 active connections openings
10 passive connection openings
1 failed connection attempts
6 connection resets received
3 connections established
26177 segments received
29995 segments send out
2 segments retransmited
0 bad segments received.
350 resets sent
Udp:
1010 packets received
77 packets to unknown port received.
0 packet receive errors
568 packets sent
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
116 delayed acks sent
3 packets directly queued to recvmsg prequeue.
3 bytes directly received in process context from prequeue
6187 packet headers predicted
15428 acknowledgments not containing data payload received
200 predicted acknowledgments
2 other TCP timeouts
11 DSACKs sent for old packets
2 DSACKs received
2 connections reset due to unexpected data
TCPDSACKIgnoredOld: 2
IpExt:
InMcastPkts: 309
OutMcastPkts: 243
InBcastPkts: 919
OutBcastPkts: 198
InOctets: 11708859
OutOctets: 5528113
InMcastOctets: 19965
OutMcastOctets: 16537
InBcastOctets: 307676
OutBcastOctets: 37580
*** Device features:
eth0: 0x180
eth1: 0x180
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH
Poulsbo) [8086:8100] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System
Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07)
(prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at d8080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Region 3: Memory at d8020000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information: Len=07 <?>
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub
(SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d8010000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Express (v1) Root Complex Integrated
Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00
AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 0000000000000000
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d8100000-d81fffff
Prefetchable memory behind bridge: d8500000-d85fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8200000-d82fffff
Prefetchable memory behind bridge: d8600000-d86fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: Memory at d8014000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #1 [8086:811c] (rev 07) (prog-if 01)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d8014400 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci
00:1e.1 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #2 [8086:811d] (rev 07) (prog-if 01)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: Memory at d8014800 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci
00:1e.2 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #3 [8086:811e] (rev 07) (prog-if 01)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d8014c00 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo)
LPC Bridge [8086:8119]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: isch_smbus
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub
(SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: pata_sch
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at d8100000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d8500000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at d8520000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4159
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 36-12-26-00-68-4c-e0-00
Kernel driver in use: r8169
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at d8200000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d8600000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at d8620000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4161
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 36-12-26-00-68-4c-e0-00
Kernel driver in use: r8169
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 012: ID 03eb:204b Atmel Corp. LUFA USB to Serial Adapter
Project
Bus 001 Device 011: ID 177f:0060 Sweex
Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 009: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 008: ID 0557:2213 ATEN International Co., Ltd
Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070
Wireless Adapter
Bus 001 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
management sy
ii initramfs-tools [linux 0.98.8 tools for generating an
initramfs
ii linux-base 2.6.32-35squeeze2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library:
Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.28 Binary firmware for Ralink
wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Sun, 25 Sep 2011 19:27:43 GMT) (full text, mbox, link).
Acknowledgement sent
to Ben Hutchings <ben@decadent.org.uk>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sun, 25 Sep 2011 19:27:43 GMT) (full text, mbox, link).
Message #10 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Please test version 2.6.32-36 from stable-proposed-updates. Ben. -- Ben Hutchings If you seem to know what you are doing, you'll be given more to do.
[signature.asc (application/pgp-signature, inline)]
Changed Bug title to 'TX watchdog timeout on RTL8168B' from 'linux-image-2.6.32-5-686: Network connection fails under heavy load.'
Request was from Ben Hutchings <ben@decadent.org.uk>
to control@bugs.debian.org.
(Sun, 25 Sep 2011 19:27:45 GMT) (full text, mbox, link).
Added tag(s) moreinfo.
Request was from Ben Hutchings <ben@decadent.org.uk>
to control@bugs.debian.org.
(Sun, 25 Sep 2011 19:36:03 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Wed, 28 Sep 2011 06:39:03 GMT) (full text, mbox, link).
Acknowledgement sent
to booster@wolke7.net:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Wed, 28 Sep 2011 06:39:03 GMT) (full text, mbox, link).
Message #19 received at 642911@bugs.debian.org (full text, mbox, reply):
Ben Hutchings wrote: > Please test version 2.6.32-36 from stable-proposed-updates. > > Ben. > > Hi Ben, I tested version 2.6.32-37. The network seems to be more stable, but I still have connection timeouts. There are no more dmesg lines for "eth0: link up" but my ssh connection still terminates from time to time. Do you need any more log files ? Gerd.
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Thu, 29 Sep 2011 00:00:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Ben Hutchings <ben@decadent.org.uk>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Thu, 29 Sep 2011 00:00:26 GMT) (full text, mbox, link).
Message #24 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
On Wed, 2011-09-28 at 08:37 +0200, booster@wolke7.net wrote:
> Ben Hutchings wrote:
> > Please test version 2.6.32-36 from stable-proposed-updates.
> >
> > Ben.
> >
> >
> Hi Ben,
> I tested version 2.6.32-37. The network seems to be more stable, but I still
> have connection timeouts. There are no more dmesg lines for "eth0: link
> up" but my
> ssh connection still terminates from time to time.
So you still see "WARNING: at ... dev_watchdog"?
> Do you need any more log files ?
They may be helpful.
Ben.
--
Ben Hutchings
Everything should be made as simple as possible, but not simpler.
- Albert Einstein
[signature.asc (application/pgp-signature, inline)]
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Thu, 24 Nov 2011 04:45:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Thu, 24 Nov 2011 04:45:03 GMT) (full text, mbox, link).
Message #29 received at 642911@bugs.debian.org (full text, mbox, reply):
Hi Gerd, Ben Hutchings wrote: > On Wed, 2011-09-28 at 08:37 +0200, booster@wolke7.net wrote: >> I tested version 2.6.32-37. The network seems to be more stable, but I still >> have connection timeouts. There are no more dmesg lines for "eth0: link >> up" but my >> ssh connection still terminates from time to time. > > So you still see "WARNING: at ... dev_watchdog"? > >> Do you need any more log files ? > > They may be helpful. Ping. Yes, yes we do need log files from the kernel you are currently using. If the latest squeeze kernel still reproduces this, please try a 3.y kernel from unstable, so we can work on this upstream (or if it's fixed in sid, so we can start looking for the fix). The only packages aside from outside squeeze aside from linux-image-foo itself that should be need in order to do so are initramfs-tools and linux-base. Thanks much, Jonathan
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Fri, 25 Nov 2011 19:12:06 GMT) (full text, mbox, link).
Acknowledgement sent
to booster@wolke7.net:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Fri, 25 Nov 2011 19:12:06 GMT) (full text, mbox, link).
Message #34 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Hi Jonathan,
Jonathan Nieder wrote:
>
> Ping. Yes, yes we do need log files from the kernel you are currently
> using.
>
> If the latest squeeze kernel still reproduces this, please try a 3.y
> kernel from unstable, so we can work on this upstream (or if it's
> fixed in sid, so we can start looking for the fix). The only packages
> aside from outside squeeze aside from linux-image-foo itself that
> should be need in order to do so are initramfs-tools and linux-base.
>
> Thanks much,
> Jonathan
>
>
All the squeeze kernels cause the same hang during high load at the network.
Today I installed the 3.1 kernel and did some testing by copying files
with samba.
The problem still exists and is even worse: Now the CPU hangs during the
interrupts:
[ 844.056012] BUG: soft lockup - CPU#0 stuck for 23s! [smbd:2770]
[ 844.058957] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc
cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib
cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop
snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel
rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer
snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211
soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios
psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit
i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif
ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal
thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded:
scsi_wait_scan]
[ 844.059058] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc
cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib
cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop
snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel
rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer
snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211
soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios
psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit
i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif
ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal
thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded:
scsi_wait_scan]
[ 844.059138]
[ 844.059144] Pid: 2770, comm: smbd Tainted: G C 3.1.0-1-486
#1 CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i
[ 844.059152] EIP: 0060:[<f826c501>] EFLAGS: 00000286 CPU: 0
[ 844.059172] EIP is at rtl8169_unmap_tx_skb.isra.49+0x7/0x46 [r8169]
[ 844.059176] EAX: f58c7060 EBX: f707b000 ECX: f73c0040 EDX: f707b888
[ 844.059181] ESI: f707b880 EDI: c138538c EBP: f707b40c ESP: f580bf74
[ 844.059186] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 844.059192] Process smbd (pid: 2770, ti=f580a000 task=f70857f0
task.ti=f53fe000)
[ 844.060004] Stack:
[ 844.060004] 44930544 f826ca23 f58c7000 bb6cfabc 00000000 f707b400
00000000 00000246
[ 844.060004] 00000040 00000040 f8014000 f5859f64 c145fb00 f707b40c
f707b40c f707b40c
[ 844.060004] c145f9d0 00000000 00000000 c11df106 0000012c 00000040
0001fb0e 00000003
[ 844.060004] Call Trace:
[ 844.060004] [<f826ca23>] ? rtl8169_poll+0x30f/0x3b5 [r8169]
[ 844.060004] [<c11df106>] ? net_rx_action+0x6e/0x155
[ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2
[ 844.060004] [<c102662c>] ? __do_softirq+0x87/0x11f
[ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2
[ 844.060004] <IRQ>
[ 844.060004] [<c10267cf>] ? irq_exit+0x31/0x7b
[ 844.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d
[ 844.060004] [<c12752f0>] ? common_interrupt+0x30/0x40
[ 844.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31
[ 844.060004] [<c1270000>] ? __schedule+0x129/0x3a5
[ 844.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132
[ 844.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92
[ 844.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48
[ 844.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db
[ 844.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650
[ 844.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db
[ 844.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803
[ 844.060004] [<c12702b5>] ? _cond_resched+0x5/0x18
[ 844.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40
[ 844.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113
[ 844.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0
[ 844.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8
[ 844.060004] [<c10a0159>] ? vfs_read+0x91/0xcf
[ 844.060004] [<c10a01d4>] ? sys_read+0x3d/0x61
[ 844.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28
[ 844.060004] Code: 8b 83 9a 0a 00 00 66 89 46 3c 8b 83 14 04 00 00 a8
01 75 05 e8 0a 2d 00 00 80 a3 14 04 00 00 fe 5b 5e 5f c3 57 8b 3d 50 53
38 c1
[ 844.060004] 89 d6 53 89 cb 8b 0a 8b 53 08 8b 7f 0c 85 ff 74 08 6a 00 6a
[ 844.060004] Call Trace:
[ 844.060004] [<f826ca23>] ? rtl8169_poll+0x30f/0x3b5 [r8169]
[ 844.060004] [<c11df106>] ? net_rx_action+0x6e/0x155
[ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2
[ 844.060004] [<c102662c>] ? __do_softirq+0x87/0x11f
[ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2
[ 844.060004] <IRQ> [<c10267cf>] ? irq_exit+0x31/0x7b
[ 844.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d
[ 844.060004] [<c12752f0>] ? common_interrupt+0x30/0x40
[ 844.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31
[ 844.060004] [<c1270000>] ? __schedule+0x129/0x3a5
[ 844.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132
[ 844.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92
[ 844.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48
[ 844.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db
[ 844.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650
[ 844.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db
[ 844.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803
[ 844.060004] [<c12702b5>] ? _cond_resched+0x5/0x18
[ 844.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40
[ 844.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113
[ 844.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0
[ 844.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8
[ 844.060004] [<c10a0159>] ? vfs_read+0x91/0xcf
[ 844.060004] [<c10a01d4>] ? sys_read+0x3d/0x61
[ 844.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28
This output repeats 3 times and then the interface is up again:
[ 912.051783] r8169 0000:02:00.0: eth0: link up
Output with the 3.1.0-1-686-pae kernel:
[ 368.616485] r8169 0000:02:00.0: eth0: link up
[ 371.416315] r8169 0000:02:00.0: eth0: link up
[ 398.212472] r8169 0000:02:00.0: eth0: link up
[ 445.948345] r8169 0000:02:00.0: eth0: link up
[ 503.456422] r8169 0000:02:00.0: eth0: link up
[ 520.916484] r8169 0000:02:00.0: eth0: link up
[ 528.624334] r8169 0000:02:00.0: eth0: link up
[ 530.824466] r8169 0000:02:00.0: eth0: link up
[ 531.356288] r8169 0000:02:00.0: eth0: link up
[ 552.028334] r8169 0000:02:00.0: eth0: link up
[ 553.943062] ------------[ cut here ]------------
[ 553.943102] WARNING: at
/build/buildd-linux-2.6_3.1.1-1-i386-6vi5gY/linux-2.6-3.1.1/debian/build/source_i386_none/net/core/dev.c:3827
net_rx_action+0xda/0x17e()
[ 553.943117] Hardware name: CM-iAM/SBC-FITPC2i
[ 553.943123] Modules linked in: cpufreq_userspace cpufreq_conservative
cpufreq_stats nfsd lockd nfs_acl auth_rpcgss sunrpc speedstep_lib
cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop arc4
snd_hda_codec_realtek rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib
mac80211 psb_gfx(C) snd_hda_intel cfg80211 snd_hda_codec drm_kms_helper
i2c_isch drm snd_hwdep rfkill tpm_tis tpm tpm_bios lpc_sch mfd_core
evdev snd_pcm snd_seq snd_timer snd_seq_device battery processor button
psmouse snd pcspkr serio_raw ac i2c_algo_bit power_supply i2c_core
soundcore snd_page_alloc video usbhid ext4 hid mbcache jbd2 crc16 sd_mod
crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod
usbcore sdhci_pci sdhci r8169 mii thermal thermal_sys mmc_core [last
unloaded: scsi_wait_scan]
[ 553.943358] Pid: 0, comm: swapper Tainted: G C
3.1.0-1-686-pae #1
[ 553.943367] Call Trace:
[ 553.943389] [<c1037698>] ? warn_slowpath_common+0x68/0x79
[ 553.943404] [<c120d061>] ? net_rx_action+0xda/0x17e
[ 553.943418] [<c10376b6>] ? warn_slowpath_null+0xd/0x10
[ 553.943432] [<c120d061>] ? net_rx_action+0xda/0x17e
[ 553.943446] [<c103c05d>] ? local_bh_enable+0x2/0x2
[ 553.943458] [<c103c0f1>] ? __do_softirq+0x94/0x12f
[ 553.943471] [<c103c05d>] ? local_bh_enable+0x2/0x2
[ 553.943479] <IRQ> [<c103c2e2>] ? irq_exit+0x32/0x80
[ 553.943502] [<c100ca6e>] ? do_IRQ+0x65/0x76
[ 553.943518] [<c12b2a30>] ? common_interrupt+0x30/0x38
[ 553.943532] [<c103007b>] ? sched_debug_show+0x165/0xb17
[ 553.943548] [<c118519b>] ? intel_idle+0xb9/0xde
[ 553.943564] [<c11f54d2>] ? cpuidle_idle_call+0xcd/0x140
[ 553.943578] [<c100aef1>] ? cpu_idle+0x86/0xaa
[ 553.943591] [<c143e708>] ? start_kernel+0x32a/0x32f
[ 553.943600] ---[ end trace 6d03368d0e01d4ae ]---
[ 553.956445] r8169 0000:02:00.0: eth0: link up
[ 562.208343] r8169 0000:02:00.0: eth0: link up
[ 604.580479] r8169 0000:02:00.0: eth0: link up
[ 604.888437] r8169 0000:02:00.0: eth0: link up
:~# lspci
00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation System Controller
Hub (SCH Poulsbo) Graphics Controller (rev 07)
00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH
Poulsbo) HD Audio Controller (rev 07)
00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 (rev 07)
00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 (rev 07)
00:1d.0 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #1 (rev 07)
00:1d.1 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #2 (rev 07)
00:1d.2 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #3 (rev 07)
00:1d.7 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB EHCI #1 (rev 07)
00:1e.0 SD Host controller: Intel Corporation System Controller Hub (SCH
Poulsbo) SDIO Controller #1 (rev 07)
00:1e.1 SD Host controller: Intel Corporation System Controller Hub (SCH
Poulsbo) SDIO Controller #2 (rev 07)
00:1e.2 SD Host controller: Intel Corporation System Controller Hub (SCH
Poulsbo) SDIO Controller #3 (rev 07)
00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge (rev 07)
00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH
Poulsbo) IDE Controller (rev 07)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
:~# ethtool -i eth0
driver: r8169
version: 2.3LK-NAPI
firmware-version: N/A
bus-info: 0000:02:00.0
:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
Link detected: yes
If you need any more information or log files please send me a mail.
Best Regards,
Gerd
[dmesg_20111125_kernel_3.1.txt (text/plain, inline)]
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-1-486 (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 Mon Nov 14 07:36:41 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000090000 (usable) [ 0.000000] BIOS-e820: 0000000000090000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6b0000 (usable) [ 0.000000] BIOS-e820: 000000007f6b0000 - 000000007f6bc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6bc000 - 000000007f6bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6bf000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] DMI: CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i, BIOS NAPA0001.86C.0000.D.1009141059 09/14/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f6b0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f8600] f8600 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c008d000] 8d000 size 12288 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 3770d000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 36e2a000 - 3770c08a [ 0.000000] Move RAMDISK from 000000003770d000 - 0000000037fef089 to 36e2a000 - 3770c089 [ 0.000000] ACPI: RSDP 000f85d0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 7f6b70db 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7f6bbdb0 000F4 (v03 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: DSDT 7f6b803a 03CF2 (v01 INTEL POULSBO 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 7f6befc0 00040 [ 0.000000] ACPI: HPET 7f6bbea4 00038 (v01 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: MCFG 7f6bbedc 0003C (v01 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: TCPA 7f6bbf18 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) [ 0.000000] ACPI: TMOR 7f6bbf4a 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 7f6bbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7f6bbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7f6b713f 004DC (v02 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6b0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000090 [ 0.000000] 0: 0x00000100 -> 0x0007f6b0 [ 0.000000] On node 0 totalpages: 521776 [ 0.000000] free_area_init_node: node 0, pgdat c13b9508, node_mem_map f5e3a200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3936 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292276 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517698 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-486 root=UUID=c8369b5c-f8fa-42d3-a640-ed1feff58e85 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6b0) [ 0.000000] Memory: 2055996k/2087616k available (2519k kernel code, 31108k reserved, 1323k data, 444k init, 1178312k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc13c1000 - 0xc1430000 ( 444 kB) [ 0.000000] .data : 0xc1275c2c - 0xc13c0b00 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc1275c2c (2519 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.242 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.48 BogoMIPS (lpj=7980968) [ 0.008006] pid_max: default: 32768 minimum: 301 [ 0.008068] Security Framework initialized [ 0.008093] Mount-cache hash table entries: 512 [ 0.008271] Initializing cgroup subsys cpuacct [ 0.008283] Initializing cgroup subsys memory [ 0.008300] Initializing cgroup subsys devices [ 0.008304] Initializing cgroup subsys freezer [ 0.008309] Initializing cgroup subsys net_cls [ 0.008314] Initializing cgroup subsys blkio [ 0.008365] using mwait in idle threads. [ 0.008376] CPU: Intel(R) Atom(TM) CPU Z550 @ 2.00GHz stepping 02 [ 0.008854] ACPI: Core revision 20110623 [ 0.016082] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.016098] ... version: 3 [ 0.016101] ... bit width: 40 [ 0.016104] ... generic registers: 2 [ 0.016107] ... value mask: 000000ffffffffff [ 0.016111] ... max period: 000000007fffffff [ 0.016114] ... fixed-purpose events: 3 [ 0.016117] ... event mask: 0000000700000003 [ 0.016414] NMI watchdog enabled, takes one hw-pmu counter. [ 0.016461] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016778] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060003] devtmpfs: initialized [ 0.060003] PM: Registering ACPI NVS region at 7f6bc000 (12288 bytes) [ 0.060003] CompuLab SBC-FITPC2 series board detected. Selecting BIOS-method for reboots. [ 0.060003] print_constraints: dummy: [ 0.060003] NET: Registered protocol family 16 [ 0.060003] EISA bus registered [ 0.060003] ACPI: bus type pci registered [ 0.060003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.060003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.060003] PCI: Using MMCONFIG for extended config space [ 0.060003] PCI: Using configuration type 1 for base access [ 0.060003] bio: create slab <bio-0> at 0 [ 0.060003] ACPI: Added _OSI(Module Device) [ 0.060003] ACPI: Added _OSI(Processor Device) [ 0.060003] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.060003] ACPI: Added _OSI(Processor Aggregator Device) [ 0.060003] ACPI: EC: Look up EC in DSDT [ 0.061888] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.062511] ACPI: SSDT 7f6b7cdf 00287 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.062824] ACPI: Dynamic OEM Table Load: [ 0.062830] ACPI: SSDT (null) 00287 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.063113] ACPI: SSDT 7f6b761b 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.063390] ACPI: Dynamic OEM Table Load: [ 0.063395] ACPI: SSDT (null) 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.164162] ACPI: Interpreter enabled [ 0.164185] ACPI: (supports S0 S3 S4 S5) [ 0.164274] ACPI: Using IOAPIC for interrupt routing [ 0.165613] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.172519] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62 [ 0.172760] ACPI: No dock devices found. [ 0.172765] HEST: Table not found. [ 0.172773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.172932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.173235] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.173242] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.173247] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.173252] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.173258] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff] [ 0.173263] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.173268] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfebfffff] [ 0.173279] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff]) [ 0.173302] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600 [ 0.173378] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300 [ 0.173401] pci 0000:00:02.0: reg 10: [mem 0xd8080000-0xd80fffff] [ 0.173413] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] [ 0.173425] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xd7ffffff] [ 0.173436] pci 0000:00:02.0: reg 1c: [mem 0xd8020000-0xd803ffff] [ 0.173532] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403 [ 0.173552] pci 0000:00:1b.0: reg 10: [mem 0xd8010000-0xd8013fff 64bit] [ 0.173610] pci 0000:00:1b.0: PME# supported from D0 D3hot [ 0.173616] pci 0000:00:1b.0: PME# disabled [ 0.173643] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604 [ 0.173699] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.173705] pci 0000:00:1c.0: PME# disabled [ 0.173730] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604 [ 0.173785] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.173792] pci 0000:00:1c.1: PME# disabled [ 0.173821] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03 [ 0.173861] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] [ 0.173895] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03 [ 0.173936] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] [ 0.173971] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03 [ 0.174011] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] [ 0.174060] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03 [ 0.174089] pci 0000:00:1d.7: reg 10: [mem 0xd8014000-0xd80143ff] [ 0.174189] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.174197] pci 0000:00:1d.7: PME# disabled [ 0.174221] pci 0000:00:1e.0: [8086:811c] type 0 class 0x000805 [ 0.174236] pci 0000:00:1e.0: reg 10: [mem 0xd8014400-0xd80144ff] [ 0.174300] pci 0000:00:1e.1: [8086:811d] type 0 class 0x000805 [ 0.174315] pci 0000:00:1e.1: reg 10: [mem 0xd8014800-0xd80148ff] [ 0.174379] pci 0000:00:1e.2: [8086:811e] type 0 class 0x000805 [ 0.174395] pci 0000:00:1e.2: reg 10: [mem 0xd8014c00-0xd8014cff] [ 0.174463] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601 [ 0.174536] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101 [ 0.174578] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] [ 0.174671] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.174692] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.174726] pci 0000:02:00.0: reg 18: [mem 0xd8100000-0xd8100fff 64bit] [ 0.174749] pci 0000:02:00.0: reg 20: [mem 0xd8500000-0xd850ffff 64bit pref] [ 0.174766] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.174810] pci 0000:02:00.0: supports D1 D2 [ 0.174814] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.174822] pci 0000:02:00.0: PME# disabled [ 0.180053] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.180069] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.180084] pci 0000:00:1c.0: bridge window [mem 0xd8100000-0xd81fffff] [ 0.180100] pci 0000:00:1c.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 0.180212] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.180247] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff] [ 0.180297] pci 0000:03:00.0: reg 18: [mem 0xd8200000-0xd8200fff 64bit] [ 0.180337] pci 0000:03:00.0: reg 20: [mem 0xd8600000-0xd860ffff 64bit pref] [ 0.180354] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.180400] pci 0000:03:00.0: supports D1 D2 [ 0.180404] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180412] pci 0000:03:00.0: PME# disabled [ 0.188049] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.188064] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.188079] pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd82fffff] [ 0.188095] pci 0000:00:1c.1: bridge window [mem 0xd8600000-0xd86fffff pref] [ 0.188123] pci_bus 0000:00: on NUMA node 0 [ 0.188140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.188491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.188596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.188763] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.188771] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.188775] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.195426] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.195534] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) [ 0.195638] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.195745] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.195850] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.195955] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.196072] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.196177] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.196366] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.196381] vgaarb: loaded [ 0.196384] vgaarb: bridge control possible 0000:00:02.0 [ 0.196475] PCI: Using ACPI for IRQ routing [ 0.203597] PCI: pci_cache_line_size set to 64 bytes [ 0.203679] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.203685] reserve RAM buffer: 000000007f6b0000 - 000000007fffffff [ 0.203871] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.203880] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.203888] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.208167] Switching to clocksource hpet [ 0.210446] pnp: PnP ACPI init [ 0.210481] ACPI: bus type pnp registered [ 0.210791] pnp 00:00: [bus 00-ff] [ 0.210798] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.210803] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.210808] pnp 00:00: [io 0x0d00-0xffff window] [ 0.210813] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.210818] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.210822] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.210827] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.210833] pnp 00:00: [mem 0x7f800000-0xfebfffff window] [ 0.210838] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.210949] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.211030] pnp 00:01: [mem 0xfd000000-0xfd003fff] [ 0.211036] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.211041] pnp 00:01: [mem 0xfed00000-0xfed3ffff] [ 0.211045] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.211050] pnp 00:01: [mem 0xfed45000-0xfed4bfff] [ 0.211142] system 00:01: [mem 0xfd000000-0xfd003fff] has been reserved [ 0.211149] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.211155] system 00:01: [mem 0xfed00000-0xfed3ffff] could not be reserved [ 0.211161] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.211167] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.211174] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.211514] pnp 00:02: [io 0x0000-0x001f] [ 0.211520] pnp 00:02: [io 0x0081-0x0091] [ 0.211524] pnp 00:02: [io 0x0093-0x009f] [ 0.211529] pnp 00:02: [io 0x00c0-0x00df] [ 0.211533] pnp 00:02: [dma 4] [ 0.211599] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.211621] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.211688] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.211756] pnp 00:04: [irq 0 disabled] [ 0.211776] pnp 00:04: [irq 8] [ 0.211781] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.211850] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.211876] pnp 00:05: [io 0x00f0] [ 0.211886] pnp 00:05: [irq 13] [ 0.211951] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.211978] pnp 00:06: [io 0x002e-0x002f] [ 0.211983] pnp 00:06: [io 0x004e-0x004f] [ 0.211987] pnp 00:06: [io 0x0061] [ 0.211991] pnp 00:06: [io 0x0063] [ 0.211995] pnp 00:06: [io 0x0065] [ 0.211999] pnp 00:06: [io 0x0067] [ 0.212003] pnp 00:06: [io 0x0070] [ 0.212007] pnp 00:06: [io 0x0080] [ 0.212011] pnp 00:06: [io 0x0092] [ 0.212011] Switched to NOHz mode on CPU #0 [ 0.212011] pnp 00:06: [io 0x00b2-0x00b3] [ 0.212011] pnp 00:06: [io 0x0295-0x0296] [ 0.212011] pnp 00:06: [io 0x0680-0x069f] [ 0.212011] pnp 00:06: [io 0x8080] [ 0.212011] pnp 00:06: [io 0x1000-0x107f] [ 0.212011] pnp 00:06: [io 0x1180-0x11bf] [ 0.212011] pnp 00:06: [io 0x1640-0x164f] [ 0.212057] system 00:06: [io 0x0295-0x0296] has been reserved [ 0.212063] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.212069] system 00:06: [io 0x8080] has been reserved [ 0.212074] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.212080] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.212086] system 00:06: [io 0x1640-0x164f] has been reserved [ 0.212092] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212153] pnp 00:07: [io 0x0070-0x0073] [ 0.212224] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.212396] pnp 00:08: [io 0x002e-0x002f] [ 0.212402] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.212495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.213010] pnp 00:09: [io 0x03f8-0x03ff] [ 0.213023] pnp 00:09: [irq 4] [ 0.213354] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.213381] pnp: PnP ACPI: found 10 devices [ 0.213385] ACPI: ACPI bus type pnp unregistered [ 0.213393] PnPBIOS: Disabled by ACPI PNP [ 0.251918] PCI: max bus depth: 1 pci_try_num: 2 [ 0.251945] pci 0000:02:00.0: BAR 6: assigned [mem 0xd8520000-0xd853ffff pref] [ 0.251952] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.251958] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.251966] pci 0000:00:1c.0: bridge window [mem 0xd8100000-0xd81fffff] [ 0.251973] pci 0000:00:1c.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 0.251984] pci 0000:03:00.0: BAR 6: assigned [mem 0xd8620000-0xd863ffff pref] [ 0.251989] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.251995] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.252015] pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd82fffff] [ 0.252022] pci 0000:00:1c.1: bridge window [mem 0xd8600000-0xd86fffff pref] [ 0.252052] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.252061] pci 0000:00:1c.0: setting latency timer to 64 [ 0.252074] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.252080] pci 0000:00:1c.1: setting latency timer to 64 [ 0.252087] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.252092] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.252098] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.252103] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff] [ 0.252108] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff] [ 0.252113] pci_bus 0000:00: resource 9 [mem 0x7f800000-0xfebfffff] [ 0.252118] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.252123] pci_bus 0000:02: resource 1 [mem 0xd8100000-0xd81fffff] [ 0.252129] pci_bus 0000:02: resource 2 [mem 0xd8500000-0xd85fffff pref] [ 0.252134] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.252139] pci_bus 0000:03: resource 1 [mem 0xd8200000-0xd82fffff] [ 0.252144] pci_bus 0000:03: resource 2 [mem 0xd8600000-0xd86fffff pref] [ 0.252221] NET: Registered protocol family 2 [ 0.252323] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.252756] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.253820] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.254139] TCP: Hash tables configured (established 131072 bind 65536) [ 0.254145] TCP reno registered [ 0.254153] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.254169] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.254385] NET: Registered protocol family 1 [ 0.254426] pci 0000:00:02.0: Boot video device [ 0.254550] PCI: CLS 64 bytes, default 64 [ 0.254657] Unpacking initramfs... [ 0.634066] Freeing initrd memory: 9100k freed [ 0.645751] Simple Boot Flag at 0x36 set to 0x1 [ 0.646713] audit: initializing netlink socket (disabled) [ 0.646735] type=2000 audit(1322244820.640:1): initialized [ 0.673052] highmem bounce pool size: 64 pages [ 0.673062] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.673237] VFS: Disk quotas dquot_6.5.2 [ 0.673272] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.673360] msgmni has been set to 1732 [ 0.673600] alg: No test for stdrng (krng) [ 0.673649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.673655] io scheduler noop registered [ 0.673659] io scheduler deadline registered [ 0.673676] io scheduler cfq registered (default) [ 0.674205] ERST: Table is not found! [ 0.674209] GHES: HEST is not enabled! [ 0.674233] isapnp: Scanning for PnP cards... [ 1.028463] isapnp: No Plug & Play device found [ 1.028606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.049028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.069952] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.070374] Linux agpgart interface v0.103 [ 1.070748] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.072600] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.072614] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.072864] mousedev: PS/2 mouse device common for all mice [ 1.072945] rtc_cmos 00:07: RTC can wake from S4 [ 1.073082] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.073109] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.073206] EISA: Probing bus 0 at eisa.0 [ 1.073213] EISA: Cannot allocate resource for mainboard [ 1.073218] Cannot allocate resource for EISA slot 1 [ 1.073223] Cannot allocate resource for EISA slot 2 [ 1.073227] Cannot allocate resource for EISA slot 3 [ 1.073231] Cannot allocate resource for EISA slot 4 [ 1.073236] Cannot allocate resource for EISA slot 5 [ 1.073240] Cannot allocate resource for EISA slot 6 [ 1.073244] Cannot allocate resource for EISA slot 7 [ 1.073248] Cannot allocate resource for EISA slot 8 [ 1.073252] EISA: Detected 0 cards. [ 1.073256] cpuidle: using governor ladder [ 1.073260] cpuidle: using governor menu [ 1.073658] TCP cubic registered [ 1.073705] NET: Registered protocol family 10 [ 1.074564] Mobile IPv6 [ 1.074570] NET: Registered protocol family 17 [ 1.074580] Registering the dns_resolver key type [ 1.074615] Using IPI Shortcut mode [ 1.074825] PM: Hibernation image not present or could not be loaded. [ 1.074845] registered taskstats version 1 [ 1.075251] rtc_cmos 00:07: setting system clock to 2011-11-25 18:13:41 UTC (1322244821) [ 1.075345] Initializing network drop monitor service [ 1.075529] Freeing unused kernel memory: 444k freed [ 1.075852] Write protecting the kernel text: 2520k [ 1.075887] Write protecting the kernel read-only data: 1040k [ 1.104223] udev[43]: starting version 164 [ 1.231388] sdhci: Secure Digital Host Controller Interface driver [ 1.231394] sdhci: Copyright(c) Pierre Ossman [ 1.231826] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:811c] (rev 7) [ 1.231858] sdhci-pci 0000:00:1e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.231899] sdhci-pci 0000:00:1e.0: setting latency timer to 64 [ 1.231924] mmc0: no vmmc regulator found [ 1.231980] Registered led device: mmc0:: [ 1.247590] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.247630] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.247669] r8169 0000:02:00.0: setting latency timer to 64 [ 1.247731] r8169 0000:02:00.0: irq 40 for MSI/MSI-X [ 1.295389] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8014000, 00:01:c0:08:aa:31, XID 1c4000c0 IRQ 40 [ 1.295436] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.295470] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.295514] r8169 0000:03:00.0: setting latency timer to 64 [ 1.295576] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.299790] usbcore: registered new interface driver usbfs [ 1.299840] usbcore: registered new interface driver hub [ 1.305549] SCSI subsystem initialized [ 1.320101] usbcore: registered new device driver usb [ 1.320923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.322951] r8169 0000:03:00.0: eth1: RTL8168c/8111c at 0xf8232000, 00:01:c0:08:aa:32, XID 1c4000c0 IRQ 41 [ 1.346530] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA [ 1.346563] sdhci-pci 0000:00:1e.1: SDHCI controller found [8086:811d] (rev 7) [ 1.346593] sdhci-pci 0000:00:1e.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.346636] sdhci-pci 0000:00:1e.1: setting latency timer to 64 [ 1.346660] mmc1: no vmmc regulator found [ 1.346714] Registered led device: mmc1:: [ 1.346764] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA [ 1.346780] sdhci-pci 0000:00:1e.2: SDHCI controller found [8086:811e] (rev 7) [ 1.346796] sdhci-pci 0000:00:1e.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.346818] sdhci-pci 0000:00:1e.2: setting latency timer to 64 [ 1.346832] mmc2: no vmmc regulator found [ 1.346875] Registered led device: mmc2:: [ 1.346924] mmc2: SDHCI controller on PCI [0000:00:1e.2] using DMA [ 1.347343] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.347373] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.347380] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.347420] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.347470] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.351352] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.359858] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.359864] ACPI: Thermal Zone [TZ00] (0 C) [ 1.363579] ACPI: Invalid active0 threshold [ 1.363783] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd8014000 [ 1.367769] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.367773] ACPI: Thermal Zone [TZ01] (0 C) [ 1.381056] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.381140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.381146] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.381151] usb usb1: Product: EHCI Host Controller [ 1.381155] usb usb1: Manufacturer: Linux 3.1.0-1-486 ehci_hcd [ 1.381160] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.381401] hub 1-0:1.0: USB hub found [ 1.381411] hub 1-0:1.0: 8 ports detected [ 1.384877] libata version 3.00 loaded. [ 1.385275] pata_sch 0000:00:1f.1: version 0.2 [ 1.385353] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 1.392361] scsi0 : pata_sch [ 1.401437] uhci_hcd: USB Universal Host Controller Interface driver [ 1.403133] scsi1 : pata_sch [ 1.403695] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.403701] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.403797] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.403812] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.403818] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.403843] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.403892] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 1.403972] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.403977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.403982] usb usb2: Product: UHCI Host Controller [ 1.403986] usb usb2: Manufacturer: Linux 3.1.0-1-486 uhci_hcd [ 1.403990] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.404277] hub 2-0:1.0: USB hub found [ 1.404287] hub 2-0:1.0: 2 ports detected [ 1.404411] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.404422] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.404428] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.404442] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.404483] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 1.404546] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.404551] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404556] usb usb3: Product: UHCI Host Controller [ 1.404560] usb usb3: Manufacturer: Linux 3.1.0-1-486 uhci_hcd [ 1.404564] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.404767] hub 3-0:1.0: USB hub found [ 1.404776] hub 3-0:1.0: 2 ports detected [ 1.404883] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.404895] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.404901] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.404919] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.404950] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 1.405013] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.405018] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.405023] usb usb4: Product: UHCI Host Controller [ 1.405027] usb usb4: Manufacturer: Linux 3.1.0-1-486 uhci_hcd [ 1.405031] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.405221] hub 4-0:1.0: USB hub found [ 1.405230] hub 4-0:1.0: 2 ports detected [ 1.573442] ata1.00: ATA-8: Hitachi HTE545050B9A300, PB4OC64G, max UDMA/133 [ 1.573449] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.589405] ata1.00: configured for UDMA/100 [ 1.589587] scsi 0:0:0:0: Direct-Access ATA Hitachi HTE54505 PB4O PQ: 0 ANSI: 5 [ 1.644061] Refined TSC clocksource calibration: 1994.999 MHz. [ 1.644080] Switching to clocksource tsc [ 1.692068] usb 1-2: new high speed USB device number 2 using ehci_hcd [ 1.774689] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.774808] sd 0:0:0:0: [sda] Write Protect is off [ 1.774814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.774865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.806361] sda: sda1 sda2 sda3 [ 1.807362] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.828490] usb 1-2: New USB device found, idVendor=0409, idProduct=005a [ 1.828507] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.829690] hub 1-2:1.0: USB hub found [ 1.829839] hub 1-2:1.0: 4 ports detected [ 1.940097] usb 1-7: new high speed USB device number 3 using ehci_hcd [ 2.089868] usb 1-7: New USB device found, idVendor=148f, idProduct=3070 [ 2.089884] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.089897] usb 1-7: Product: 802.11 n WLAN [ 2.089907] usb 1-7: Manufacturer: Ralink [ 2.089916] usb 1-7: SerialNumber: 1.0 [ 2.180237] usb 1-2.4: new low speed USB device number 4 using ehci_hcd [ 2.350466] usb 1-2.4: New USB device found, idVendor=0557, idProduct=2213 [ 2.350474] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.350479] usb 1-2.4: Product: CS1784 [ 2.350482] usb 1-2.4: Manufacturer: ATEN [ 2.395759] PM: Starting manual resume from disk [ 2.395766] PM: Hibernation image partition 8:2 present [ 2.395769] PM: Looking for hibernation image. [ 2.400060] input: ATEN CS1784 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.0/input/input0 [ 2.400306] generic-usb 0003:0557:2213.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN CS1784] on usb-0000:00:1d.7-2.4/input0 [ 2.406539] PM: Image not found (code -22) [ 2.406549] PM: Hibernation image not present or could not be loaded. [ 2.424574] input: ATEN CS1784 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.1/input/input1 [ 2.424890] generic-usb 0003:0557:2213.0002: input,hidraw1: USB HID v1.00 Mouse [ATEN CS1784] on usb-0000:00:1d.7-2.4/input1 [ 2.425236] usbcore: registered new interface driver usbhid [ 2.425241] usbhid: USB HID core driver [ 2.552482] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 4.368637] udev[260]: starting version 164 [ 4.815779] ACPI: acpi_idle registered with cpuidle [ 4.884675] Monitor-Mwait will be used to enter C-1 state [ 4.884681] Monitor-Mwait will be used to enter C-2 state [ 4.884686] Monitor-Mwait will be used to enter C-3 state [ 4.884690] Monitor-Mwait will be used to enter C-3 state [ 4.884696] Marking TSC unstable due to TSC halts in idle [ 4.904299] Switching to clocksource hpet [ 4.905663] ACPI: Battery Slot [BAT0] (battery absent) [ 4.905711] ACPI: Battery Slot [BAT1] (battery absent) [ 4.905755] ACPI: Battery Slot [BAT2] (battery absent) [ 4.918206] ACPI: AC Adapter [ADP1] (on-line) [ 4.919912] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 4.919923] ACPI: Power Button [PWRB] [ 4.920128] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.920135] ACPI: Power Button [PWRF] [ 4.920147] ACPI Error: Could not enable PowerButton event (20110623/evxfevnt-198) [ 4.920155] ACPI Warning: Could not enable fixed event 0x2 (20110623/evxface-197) [ 4.920281] button: probe of LNXPWRBN:00 failed with error -22 [ 5.080619] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.368528] cfg80211: Calling CRDA to update world regulatory domain [ 5.379123] [drm] Initialized drm 1.1.0 20060810 [ 5.559105] psb_gfx: module is from the staging directory, the quality is unknown, you have been warned. [ 5.570880] gma500 0000:00:02.0: irq 42 for MSI/MSI-X [ 5.570908] gma500 0000:00:02.0: setting latency timer to 64 [ 5.572284] ioremap error for 0x7f6bc000-0x7f6bf000, requested 0x10, got 0x0 [ 5.572485] Stolen memory information [ 5.572488] base in RAM: 0x7f800000 [ 5.572492] size: 8060K, calculated by (GTT RAM base) - (Stolen base), seems wrong [ 5.572496] the correct size should be: 8M(dvmt mode=3) [ 5.574295] Set up 2015 stolen pages starting at 0x7f800000, GTT offset 0K [ 5.574476] [drm] SGX core id = 0x01130000 [ 5.574480] [drm] SGX core rev major = 0x01, minor = 0x02 [ 5.574483] [drm] SGX core rev maintenance = 0x01, designer = 0x00 [ 5.588571] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 5.640976] acpi device:05: registered as cooling_device1 [ 5.692937] acpi device:06: registered as cooling_device2 [ 5.693870] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 5.694126] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.694565] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.694571] [drm] No driver support for vblank timestamp query. [ 6.084039] usb 1-7: reset high speed USB device number 3 using ehci_hcd [ 6.446193] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.447205] Registered led device: rt2800usb-phy0::radio [ 6.447250] Registered led device: rt2800usb-phy0::assoc [ 6.447289] Registered led device: rt2800usb-phy0::quality [ 6.448210] usbcore: registered new interface driver rt2800usb [ 6.574211] Raw EDID: [ 6.574270] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574329] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574387] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574445] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574502] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574560] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574618] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574676] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.574738] gma500 0000:00:02.0: LVDS-1: EDID block 0 invalid. [ 7.822379] Raw EDID: [ 7.822438] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822497] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822555] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822613] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822671] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822729] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822786] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822844] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.822926] gma500 0000:00:02.0: LVDS-1: EDID block 0 invalid. [ 7.870140] gma500 0000:00:02.0: allocated 1024x768 fb [ 7.870413] fbcon: psbfb (fb0) is primary device [ 8.286735] Console: switching to colour frame buffer device 128x48 [ 8.294541] fb0: psbfb frame buffer device [ 8.294544] drm: registered panic notifier [ 8.295121] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 8.295190] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.295265] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 8.356125] hda_codec: ALC662 rev1: SKU not ready 0x411111f0 [ 8.356298] hda_codec: ALC662 rev1: BIOS auto-probing. [ 8.358385] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 8.362911] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 8.912803] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1 across:3906556k [ 8.919302] EXT4-fs (sda3): re-mounted. Opts: (null) [ 9.220179] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.387569] loop: module loaded [ 11.487698] r8169 0000:03:00.0: eth1: link down [ 11.490641] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.505256] r8169 0000:02:00.0: eth0: link down [ 11.505267] r8169 0000:02:00.0: eth0: link down [ 11.505640] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.940455] fuse init (API version 7.17) [ 14.349782] r8169 0000:02:00.0: eth0: link up [ 14.350235] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.173733] powernow: This module only works with AMD K7 CPUs [ 16.825068] cpufreq-nforce2: No nForce2 chipset. [ 19.098923] RPC: Registered named UNIX socket transport module. [ 19.098930] RPC: Registered udp transport module. [ 19.098933] RPC: Registered tcp transport module. [ 19.098936] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.272718] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 19.365141] svc: failed to register lockdv1 RPC service (errno 97). [ 19.365207] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 19.400941] NFSD: starting 90-second grace period [ 40.939001] sshd (2020): /proc/2020/oom_adj is deprecated, please use /proc/2020/oom_score_adj instead. [ 844.056012] BUG: soft lockup - CPU#0 stuck for 23s! [smbd:2770] [ 844.058957] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211 soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded: scsi_wait_scan] [ 844.059058] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211 soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded: scsi_wait_scan] [ 844.059138] [ 844.059144] Pid: 2770, comm: smbd Tainted: G C 3.1.0-1-486 #1 CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i [ 844.059152] EIP: 0060:[<f826c501>] EFLAGS: 00000286 CPU: 0 [ 844.059172] EIP is at rtl8169_unmap_tx_skb.isra.49+0x7/0x46 [r8169] [ 844.059176] EAX: f58c7060 EBX: f707b000 ECX: f73c0040 EDX: f707b888 [ 844.059181] ESI: f707b880 EDI: c138538c EBP: f707b40c ESP: f580bf74 [ 844.059186] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 844.059192] Process smbd (pid: 2770, ti=f580a000 task=f70857f0 task.ti=f53fe000) [ 844.060004] Stack: [ 844.060004] 44930544 f826ca23 f58c7000 bb6cfabc 00000000 f707b400 00000000 00000246 [ 844.060004] 00000040 00000040 f8014000 f5859f64 c145fb00 f707b40c f707b40c f707b40c [ 844.060004] c145f9d0 00000000 00000000 c11df106 0000012c 00000040 0001fb0e 00000003 [ 844.060004] Call Trace: [ 844.060004] [<f826ca23>] ? rtl8169_poll+0x30f/0x3b5 [r8169] [ 844.060004] [<c11df106>] ? net_rx_action+0x6e/0x155 [ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 844.060004] [<c102662c>] ? __do_softirq+0x87/0x11f [ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 844.060004] <IRQ> [ 844.060004] [<c10267cf>] ? irq_exit+0x31/0x7b [ 844.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d [ 844.060004] [<c12752f0>] ? common_interrupt+0x30/0x40 [ 844.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31 [ 844.060004] [<c1270000>] ? __schedule+0x129/0x3a5 [ 844.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132 [ 844.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92 [ 844.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48 [ 844.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db [ 844.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650 [ 844.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db [ 844.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803 [ 844.060004] [<c12702b5>] ? _cond_resched+0x5/0x18 [ 844.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40 [ 844.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113 [ 844.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0 [ 844.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8 [ 844.060004] [<c10a0159>] ? vfs_read+0x91/0xcf [ 844.060004] [<c10a01d4>] ? sys_read+0x3d/0x61 [ 844.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28 [ 844.060004] Code: 8b 83 9a 0a 00 00 66 89 46 3c 8b 83 14 04 00 00 a8 01 75 05 e8 0a 2d 00 00 80 a3 14 04 00 00 fe 5b 5e 5f c3 57 8b 3d 50 53 38 c1 [ 844.060004] 89 d6 53 89 cb 8b 0a 8b 53 08 8b 7f 0c 85 ff 74 08 6a 00 6a [ 844.060004] Call Trace: [ 844.060004] [<f826ca23>] ? rtl8169_poll+0x30f/0x3b5 [r8169] [ 844.060004] [<c11df106>] ? net_rx_action+0x6e/0x155 [ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 844.060004] [<c102662c>] ? __do_softirq+0x87/0x11f [ 844.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 844.060004] <IRQ> [<c10267cf>] ? irq_exit+0x31/0x7b [ 844.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d [ 844.060004] [<c12752f0>] ? common_interrupt+0x30/0x40 [ 844.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31 [ 844.060004] [<c1270000>] ? __schedule+0x129/0x3a5 [ 844.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132 [ 844.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92 [ 844.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48 [ 844.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db [ 844.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650 [ 844.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db [ 844.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803 [ 844.060004] [<c12702b5>] ? _cond_resched+0x5/0x18 [ 844.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40 [ 844.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113 [ 844.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0 [ 844.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8 [ 844.060004] [<c10a0159>] ? vfs_read+0x91/0xcf [ 844.060004] [<c10a01d4>] ? sys_read+0x3d/0x61 [ 844.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28 [ 872.056011] BUG: soft lockup - CPU#0 stuck for 23s! [smbd:2770] [ 872.059226] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211 soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded: scsi_wait_scan] [ 872.059308] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211 soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded: scsi_wait_scan] [ 872.059388] [ 872.059392] Pid: 2770, comm: smbd Tainted: G C 3.1.0-1-486 #1 CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i [ 872.059400] EIP: 0060:[<f826c9fb>] EFLAGS: 00000286 CPU: 0 [ 872.059412] EIP is at rtl8169_poll+0x2e7/0x3b5 [r8169] [ 872.059416] EAX: 00000029 EBX: f707b000 ECX: f73c0290 EDX: 00000000 [ 872.059421] ESI: f707b9a0 EDI: 91cd62e9 EBP: f707b40c ESP: f580bf7c [ 872.059425] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 872.059430] Process smbd (pid: 2770, ti=f580a000 task=f70857f0 task.ti=f53fe000) [ 872.060004] Stack: [ 872.060004] f58c7000 6e329d17 00000000 f707b400 00000000 00000246 00000040 00000040 [ 872.060004] f8014000 f5859f64 c145fb00 f707b40c f707b40c f707b40c c145f9d0 00000000 [ 872.060004] 00000000 c11df106 0000012c 00000040 0001fb0e 00000003 c145f9d0 c10265a5 [ 872.060004] Call Trace: [ 872.060004] [<c11df106>] ? net_rx_action+0x6e/0x155 [ 872.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 872.060004] [<c102662c>] ? __do_softirq+0x87/0x11f [ 872.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 872.060004] <IRQ> [ 872.060004] [<c10267cf>] ? irq_exit+0x31/0x7b [ 872.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d [ 872.060004] [<c12752f0>] ? common_interrupt+0x30/0x40 [ 872.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31 [ 872.060004] [<c1270000>] ? __schedule+0x129/0x3a5 [ 872.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132 [ 872.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92 [ 872.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48 [ 872.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db [ 872.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650 [ 872.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db [ 872.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803 [ 872.060004] [<c12702b5>] ? _cond_resched+0x5/0x18 [ 872.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40 [ 872.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113 [ 872.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0 [ 872.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8 [ 872.060004] [<c10a0159>] ? vfs_read+0x91/0xcf [ 872.060004] [<c10a01d4>] ? sys_read+0x3d/0x61 [ 872.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28 [ 872.060004] Code: 38 89 4c 24 08 01 4d 40 8b 55 3c 29 fa 89 54 24 04 eb 6d 89 f8 83 e0 3f 0f ae e8 89 f6 8b 54 24 0c 89 c1 c1 e1 04 03 4a 54 8b 11 [ 872.060004] d2 89 54 24 10 78 54 8b 54 24 0c 8d b4 c2 60 04 00 00 8b 44 [ 872.060004] Call Trace: [ 872.060004] [<c11df106>] ? net_rx_action+0x6e/0x155 [ 872.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 872.060004] [<c102662c>] ? __do_softirq+0x87/0x11f [ 872.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 872.060004] <IRQ> [<c10267cf>] ? irq_exit+0x31/0x7b [ 872.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d [ 872.060004] [<c12752f0>] ? common_interrupt+0x30/0x40 [ 872.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31 [ 872.060004] [<c1270000>] ? __schedule+0x129/0x3a5 [ 872.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132 [ 872.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92 [ 872.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48 [ 872.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db [ 872.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650 [ 872.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db [ 872.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803 [ 872.060004] [<c12702b5>] ? _cond_resched+0x5/0x18 [ 872.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40 [ 872.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113 [ 872.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0 [ 872.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8 [ 872.060004] [<c10a0159>] ? vfs_read+0x91/0xcf [ 872.060004] [<c10a01d4>] ? sys_read+0x3d/0x61 [ 872.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28 [ 900.056011] BUG: soft lockup - CPU#0 stuck for 23s! [smbd:2770] [ 900.059798] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211 soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded: scsi_wait_scan] [ 900.059882] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop snd_hda_codec_realtek arc4 rt2800usb rt2800lib crc_ccitt snd_hda_intel rt2x00usb snd_hda_codec rt2x00lib snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mac80211 psb_gfx(C) drm_kms_helper snd drm cfg80211 soundcore i2c_isch tpm_tis tpm snd_page_alloc evdev lpc_sch tpm_bios psmouse pcspkr serio_raw rfkill button ac battery processor i2c_algo_bit i2c_core video ext4 mbcache jbd2 crc16 usbhid hid sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore thermal thermal_sys r8169 sdhci_pci sdhci mmc_core mii [last unloaded: scsi_wait_scan] [ 900.059962] [ 900.059966] Pid: 2770, comm: smbd Tainted: G C 3.1.0-1-486 #1 CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i [ 900.059975] EIP: 0060:[<f826c50c>] EFLAGS: 00000286 CPU: 0 [ 900.059987] EIP is at rtl8169_unmap_tx_skb.isra.49+0x12/0x46 [r8169] [ 900.059991] EAX: f58c7060 EBX: f73c0170 ECX: 00000000 EDX: 00000000 [ 900.059996] ESI: f707b920 EDI: c138538c EBP: f707b40c ESP: f580bf6c [ 900.060000] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 900.060004] Process smbd (pid: 2770, ti=f580a000 task=f70857f0 task.ti=f53fe000) [ 900.060004] Stack: [ 900.060004] f707b000 f707b918 df07c457 f826ca23 f58c7000 20f83ba9 00000000 f707b400 [ 900.060004] 00000000 00000246 00000040 00000040 f8014000 f5859f64 c145fb00 f707b40c [ 900.060004] f707b40c f707b40c c145f9d0 00000000 00000000 c11df106 0000012c 00000040 [ 900.060004] Call Trace: [ 900.060004] [<f826ca23>] ? rtl8169_poll+0x30f/0x3b5 [r8169] [ 900.060004] [<c11df106>] ? net_rx_action+0x6e/0x155 [ 900.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 900.060004] [<c102662c>] ? __do_softirq+0x87/0x11f [ 900.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 900.060004] <IRQ> [ 900.060004] [<c10267cf>] ? irq_exit+0x31/0x7b [ 900.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d [ 900.060004] [<c12752f0>] ? common_interrupt+0x30/0x40 [ 900.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31 [ 900.060004] [<c1270000>] ? __schedule+0x129/0x3a5 [ 900.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132 [ 900.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92 [ 900.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48 [ 900.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db [ 900.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650 [ 900.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db [ 900.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803 [ 900.060004] [<c12702b5>] ? _cond_resched+0x5/0x18 [ 900.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40 [ 900.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113 [ 900.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0 [ 900.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8 [ 900.060004] [<c10a0159>] ? vfs_read+0x91/0xcf [ 900.060004] [<c10a01d4>] ? sys_read+0x3d/0x61 [ 900.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28 [ 900.060004] Code: 83 14 04 00 00 a8 01 75 05 e8 0a 2d 00 00 80 a3 14 04 00 00 fe 5b 5e 5f c3 57 8b 3d 50 53 38 c1 56 89 d6 53 89 cb 8b 0a 8b 53 08 <8b> 7f 0c 85 ff 74 08 6a 00 6a 01 ff d7 59 5f c7 03 00 00 00 00 [ 900.060004] Call Trace: [ 900.060004] [<f826ca23>] ? rtl8169_poll+0x30f/0x3b5 [r8169] [ 900.060004] [<c11df106>] ? net_rx_action+0x6e/0x155 [ 900.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 900.060004] [<c102662c>] ? __do_softirq+0x87/0x11f [ 900.060004] [<c10265a5>] ? local_bh_enable+0x2/0x2 [ 900.060004] <IRQ> [<c10267cf>] ? irq_exit+0x31/0x7b [ 900.060004] [<c10033a2>] ? do_IRQ+0x5d/0x6d [ 900.060004] [<c12752f0>] ? common_interrupt+0x30/0x40 [ 900.060004] [<c101007b>] ? smp_spurious_interrupt+0x6/0x31 [ 900.060004] [<c1270000>] ? __schedule+0x129/0x3a5 [ 900.060004] [<c11200e0>] ? cfq_close_cooperator+0xe9/0x132 [ 900.060004] [<c1128fbd>] ? __copy_user_intel+0x49/0x92 [ 900.060004] [<c11d95b4>] ? memcpy_toiovec+0x26/0x48 [ 900.060004] [<c11d9e36>] ? skb_copy_datagram_iovec+0x80/0x1db [ 900.060004] [<c120f988>] ? tcp_transmit_skb+0x628/0x650 [ 900.060004] [<c11d9f58>] ? skb_copy_datagram_iovec+0x1a2/0x1db [ 900.060004] [<c1207b2d>] ? tcp_recvmsg+0x584/0x803 [ 900.060004] [<c12702b5>] ? _cond_resched+0x5/0x18 [ 900.060004] [<c121d9b2>] ? inet_recvmsg+0x2e/0x40 [ 900.060004] [<c11d250d>] ? sock_aio_read+0x109/0x113 [ 900.060004] [<c109faea>] ? do_sync_read+0x9c/0xd0 [ 900.060004] [<c109fdda>] ? rw_verify_area+0xc6/0xe8 [ 900.060004] [<c10a0159>] ? vfs_read+0x91/0xcf [ 900.060004] [<c10a01d4>] ? sys_read+0x3d/0x61 [ 900.060004] [<c1274d23>] ? sysenter_do_call+0x12/0x28 [ 912.051783] r8169 0000:02:00.0: eth0: link up
[dmesg_20111125_kernel_3.1-pae.txt (text/plain, inline)]
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:24:20 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000090000 (usable) [ 0.000000] BIOS-e820: 0000000000090000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6b0000 (usable) [ 0.000000] BIOS-e820: 000000007f6b0000 - 000000007f6bc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6bc000 - 000000007f6bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6bf000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i, BIOS NAPA0001.86C.0000.D.1009141059 09/14/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f6b0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f8600] f8600 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c008c000] 8c000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 376f4000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 36df8000 - 376f3b6a [ 0.000000] Move RAMDISK from 00000000376f4000 - 0000000037fefb69 to 36df8000 - 376f3b69 [ 0.000000] ACPI: RSDP 000f85d0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 7f6b70db 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7f6bbdb0 000F4 (v03 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: DSDT 7f6b803a 03CF2 (v01 INTEL POULSBO 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 7f6befc0 00040 [ 0.000000] ACPI: HPET 7f6bbea4 00038 (v01 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: MCFG 7f6bbedc 0003C (v01 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: TCPA 7f6bbf18 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) [ 0.000000] ACPI: TMOR 7f6bbf4a 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 7f6bbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7f6bbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7f6b713f 004DC (v02 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1148MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007f6b0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000090 [ 0.000000] 0: 0x00000100 -> 0x0007f6b0 [ 0.000000] On node 0 totalpages: 521776 [ 0.000000] free_area_init_node: node 0, pgdat c1436800, node_mem_map f5e08200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3936 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2298 pages used for memmap [ 0.000000] HighMem zone: 291768 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s31744 r0 d21504 u1048576 [ 0.000000] pcpu-alloc: s31744 r0 d21504 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517698 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-686-pae root=UUID=c8369b5c-f8fa-42d3-a640-ed1feff58e85 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f6b0) [ 0.000000] Memory: 2055248k/2087616k available (2765k kernel code, 31856k reserved, 1578k data, 404k init, 1176264k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc143e000 - 0xc14a3000 ( 404 kB) [ 0.000000] .data : 0xc12b34ec - 0xc143dec0 (1578 kB) [ 0.000000] .text : 0xc1000000 - 0xc12b34ec (2765 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.951 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.90 BogoMIPS (lpj=7979804) [ 0.008014] pid_max: default: 32768 minimum: 301 [ 0.008111] Security Framework initialized [ 0.008160] Mount-cache hash table entries: 512 [ 0.008708] Initializing cgroup subsys cpuacct [ 0.008753] Initializing cgroup subsys memory [ 0.008780] Initializing cgroup subsys devices [ 0.008785] Initializing cgroup subsys freezer [ 0.008789] Initializing cgroup subsys net_cls [ 0.008794] Initializing cgroup subsys blkio [ 0.008851] CPU: Physical Processor ID: 0 [ 0.008855] CPU: Processor Core ID: 0 [ 0.008860] mce: CPU supports 5 MCE banks [ 0.008873] CPU0: Thermal monitoring enabled (TM1) [ 0.008880] using mwait in idle threads. [ 0.009338] ACPI: Core revision 20110623 [ 0.016105] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.058216] CPU0: Intel(R) Atom(TM) CPU Z550 @ 2.00GHz stepping 02 [ 0.060003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.060003] ... version: 3 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] CPU 1 irqstacks, hard=f58b4000 soft=f58b6000 [ 0.060003] Booting Node 0, Processors #1 Ok. [ 0.060003] smpboot cpu 1: start_ip = 8c000 [ 0.012000] Initializing CPU#1 [ 0.148062] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148129] Brought up 2 CPUs [ 0.148136] Total of 2 processors activated (7979.81 BogoMIPS). [ 0.148801] devtmpfs: initialized [ 0.148801] PM: Registering ACPI NVS region at 7f6bc000 (12288 bytes) [ 0.148801] CompuLab SBC-FITPC2 series board detected. Selecting BIOS-method for reboots. [ 0.148801] print_constraints: dummy: [ 0.148801] NET: Registered protocol family 16 [ 0.148801] ACPI: bus type pci registered [ 0.149016] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.149023] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.149027] PCI: Using MMCONFIG for extended config space [ 0.149031] PCI: Using configuration type 1 for base access [ 0.149842] bio: create slab <bio-0> at 0 [ 0.152145] ACPI: Added _OSI(Module Device) [ 0.152150] ACPI: Added _OSI(Processor Device) [ 0.152155] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152159] ACPI: Added _OSI(Processor Aggregator Device) [ 0.153436] ACPI: EC: Look up EC in DSDT [ 0.156039] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.156687] ACPI: SSDT 7f6b7cdf 00287 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.157030] ACPI: Dynamic OEM Table Load: [ 0.157036] ACPI: SSDT (null) 00287 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.157319] ACPI: SSDT 7f6b761b 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.157626] ACPI: Dynamic OEM Table Load: [ 0.157632] ACPI: SSDT (null) 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.158110] ACPI: SSDT 7f6b7f66 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.158435] ACPI: Dynamic OEM Table Load: [ 0.158441] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.158632] ACPI: SSDT 7f6b7c5a 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.158940] ACPI: Dynamic OEM Table Load: [ 0.158946] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.360183] ACPI: Interpreter enabled [ 0.360207] ACPI: (supports S0 S3 S4 S5) [ 0.360295] ACPI: Using IOAPIC for interrupt routing [ 0.361600] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.368775] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62 [ 0.369026] ACPI: No dock devices found. [ 0.369031] HEST: Table not found. [ 0.369039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.369201] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.369502] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.369508] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.369514] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.369519] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.369525] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff] [ 0.369530] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.369536] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfebfffff] [ 0.369548] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff]) [ 0.369571] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600 [ 0.369652] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300 [ 0.369675] pci 0000:00:02.0: reg 10: [mem 0xd8080000-0xd80fffff] [ 0.369687] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] [ 0.369699] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xd7ffffff] [ 0.369712] pci 0000:00:02.0: reg 1c: [mem 0xd8020000-0xd803ffff] [ 0.369809] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403 [ 0.369829] pci 0000:00:1b.0: reg 10: [mem 0xd8010000-0xd8013fff 64bit] [ 0.369889] pci 0000:00:1b.0: PME# supported from D0 D3hot [ 0.369896] pci 0000:00:1b.0: PME# disabled [ 0.369924] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604 [ 0.369982] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.369988] pci 0000:00:1c.0: PME# disabled [ 0.370015] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604 [ 0.370071] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.370078] pci 0000:00:1c.1: PME# disabled [ 0.370108] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03 [ 0.370149] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] [ 0.370184] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03 [ 0.370226] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] [ 0.370263] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03 [ 0.370304] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] [ 0.370355] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03 [ 0.370384] pci 0000:00:1d.7: reg 10: [mem 0xd8014000-0xd80143ff] [ 0.370486] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.370494] pci 0000:00:1d.7: PME# disabled [ 0.370520] pci 0000:00:1e.0: [8086:811c] type 0 class 0x000805 [ 0.370536] pci 0000:00:1e.0: reg 10: [mem 0xd8014400-0xd80144ff] [ 0.370601] pci 0000:00:1e.1: [8086:811d] type 0 class 0x000805 [ 0.370617] pci 0000:00:1e.1: reg 10: [mem 0xd8014800-0xd80148ff] [ 0.370683] pci 0000:00:1e.2: [8086:811e] type 0 class 0x000805 [ 0.370699] pci 0000:00:1e.2: reg 10: [mem 0xd8014c00-0xd8014cff] [ 0.370770] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601 [ 0.370846] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101 [ 0.370889] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] [ 0.370984] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.371006] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.371040] pci 0000:02:00.0: reg 18: [mem 0xd8100000-0xd8100fff 64bit] [ 0.371063] pci 0000:02:00.0: reg 20: [mem 0xd8500000-0xd850ffff 64bit pref] [ 0.371080] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.371126] pci 0000:02:00.0: supports D1 D2 [ 0.371130] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.371138] pci 0000:02:00.0: PME# disabled [ 0.376073] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.376090] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.376106] pci 0000:00:1c.0: bridge window [mem 0xd8100000-0xd81fffff] [ 0.376122] pci 0000:00:1c.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 0.376244] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.376282] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff] [ 0.376339] pci 0000:03:00.0: reg 18: [mem 0xd8200000-0xd8200fff 64bit] [ 0.376363] pci 0000:03:00.0: reg 20: [mem 0xd8600000-0xd860ffff 64bit pref] [ 0.376380] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.376426] pci 0000:03:00.0: supports D1 D2 [ 0.376431] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.376439] pci 0000:03:00.0: PME# disabled [ 0.384068] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.384085] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.384100] pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd82fffff] [ 0.384117] pci 0000:00:1c.1: bridge window [mem 0xd8600000-0xd86fffff pref] [ 0.384146] pci_bus 0000:00: on NUMA node 0 [ 0.384165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.384516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.384621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.384796] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.384803] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.384807] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.391581] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.391690] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) [ 0.391796] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.391902] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.392007] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.392132] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.392244] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.392357] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.392527] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.392527] vgaarb: loaded [ 0.392527] vgaarb: bridge control possible 0000:00:02.0 [ 0.392527] PCI: Using ACPI for IRQ routing [ 0.400080] PCI: pci_cache_line_size set to 64 bytes [ 0.400168] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.400178] reserve RAM buffer: 000000007f6b0000 - 000000007fffffff [ 0.400431] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.400441] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.400450] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.404099] Switching to clocksource hpet [ 0.407249] pnp: PnP ACPI init [ 0.407287] ACPI: bus type pnp registered [ 0.407592] pnp 00:00: [bus 00-ff] [ 0.407599] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.407605] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.407610] pnp 00:00: [io 0x0d00-0xffff window] [ 0.407615] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.407620] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.407625] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.407630] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.407636] pnp 00:00: [mem 0x7f800000-0xfebfffff window] [ 0.407641] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.407730] Switched to NOHz mode on CPU #0 [ 0.407754] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.407846] pnp 00:01: [mem 0xfd000000-0xfd003fff] [ 0.407851] Switched to NOHz mode on CPU #1 [ 0.407856] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.407862] pnp 00:01: [mem 0xfed00000-0xfed3ffff] [ 0.407867] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.407874] pnp 00:01: [mem 0xfed45000-0xfed4bfff] [ 0.407983] system 00:01: [mem 0xfd000000-0xfd003fff] has been reserved [ 0.407990] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.407997] system 00:01: [mem 0xfed00000-0xfed3ffff] could not be reserved [ 0.408018] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.408025] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.408032] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.408385] pnp 00:02: [io 0x0000-0x001f] [ 0.408390] pnp 00:02: [io 0x0081-0x0091] [ 0.408395] pnp 00:02: [io 0x0093-0x009f] [ 0.408400] pnp 00:02: [io 0x00c0-0x00df] [ 0.408404] pnp 00:02: [dma 4] [ 0.408473] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.408495] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.408560] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.408629] pnp 00:04: [irq 0 disabled] [ 0.408647] pnp 00:04: [irq 8] [ 0.408652] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.408720] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.408748] pnp 00:05: [io 0x00f0] [ 0.408757] pnp 00:05: [irq 13] [ 0.408830] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.408860] pnp 00:06: [io 0x002e-0x002f] [ 0.408865] pnp 00:06: [io 0x004e-0x004f] [ 0.408870] pnp 00:06: [io 0x0061] [ 0.408874] pnp 00:06: [io 0x0063] [ 0.408878] pnp 00:06: [io 0x0065] [ 0.408882] pnp 00:06: [io 0x0067] [ 0.408886] pnp 00:06: [io 0x0070] [ 0.408891] pnp 00:06: [io 0x0080] [ 0.408895] pnp 00:06: [io 0x0092] [ 0.408899] pnp 00:06: [io 0x00b2-0x00b3] [ 0.408904] pnp 00:06: [io 0x0295-0x0296] [ 0.408908] pnp 00:06: [io 0x0680-0x069f] [ 0.408913] pnp 00:06: [io 0x8080] [ 0.408917] pnp 00:06: [io 0x1000-0x107f] [ 0.408922] pnp 00:06: [io 0x1180-0x11bf] [ 0.408926] pnp 00:06: [io 0x1640-0x164f] [ 0.409035] system 00:06: [io 0x0295-0x0296] has been reserved [ 0.409042] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.409048] system 00:06: [io 0x8080] has been reserved [ 0.409054] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.409060] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.409066] system 00:06: [io 0x1640-0x164f] has been reserved [ 0.409072] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.409126] pnp 00:07: [io 0x0070-0x0073] [ 0.409196] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.409371] pnp 00:08: [io 0x002e-0x002f] [ 0.409377] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.409473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.409986] pnp 00:09: [io 0x03f8-0x03ff] [ 0.409997] pnp 00:09: [irq 4] [ 0.410337] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.410364] pnp: PnP ACPI: found 10 devices [ 0.410368] ACPI: ACPI bus type pnp unregistered [ 0.410375] PnPBIOS: Disabled by ACPI PNP [ 0.450380] PCI: max bus depth: 1 pci_try_num: 2 [ 0.450413] pci 0000:02:00.0: BAR 6: assigned [mem 0xd8520000-0xd853ffff pref] [ 0.450420] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.450426] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.450435] pci 0000:00:1c.0: bridge window [mem 0xd8100000-0xd81fffff] [ 0.450442] pci 0000:00:1c.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 0.450454] pci 0000:03:00.0: BAR 6: assigned [mem 0xd8620000-0xd863ffff pref] [ 0.450459] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.450465] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.450473] pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd82fffff] [ 0.450480] pci 0000:00:1c.1: bridge window [mem 0xd8600000-0xd86fffff pref] [ 0.450512] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.450521] pci 0000:00:1c.0: setting latency timer to 64 [ 0.450535] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.450542] pci 0000:00:1c.1: setting latency timer to 64 [ 0.450549] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.450555] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.450560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.450565] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff] [ 0.450571] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff] [ 0.450576] pci_bus 0000:00: resource 9 [mem 0x7f800000-0xfebfffff] [ 0.450582] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.450587] pci_bus 0000:02: resource 1 [mem 0xd8100000-0xd81fffff] [ 0.450592] pci_bus 0000:02: resource 2 [mem 0xd8500000-0xd85fffff pref] [ 0.450598] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.450603] pci_bus 0000:03: resource 1 [mem 0xd8200000-0xd82fffff] [ 0.450608] pci_bus 0000:03: resource 2 [mem 0xd8600000-0xd86fffff pref] [ 0.450738] NET: Registered protocol family 2 [ 0.450918] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.451483] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.452575] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.453193] TCP: Hash tables configured (established 131072 bind 65536) [ 0.453199] TCP reno registered [ 0.453208] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.453234] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.453625] NET: Registered protocol family 1 [ 0.453666] pci 0000:00:02.0: Boot video device [ 0.453798] PCI: CLS 64 bytes, default 64 [ 0.453911] Unpacking initramfs... [ 0.838354] Freeing initrd memory: 9200k freed [ 0.850296] Simple Boot Flag at 0x36 set to 0x1 [ 0.851240] audit: initializing netlink socket (disabled) [ 0.851265] type=2000 audit(1322247117.844:1): initialized [ 0.879782] highmem bounce pool size: 64 pages [ 0.879792] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.889960] VFS: Disk quotas dquot_6.5.2 [ 0.890115] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.890338] msgmni has been set to 1734 [ 0.890701] alg: No test for stdrng (krng) [ 0.890773] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.890779] io scheduler noop registered [ 0.890783] io scheduler deadline registered [ 0.890812] io scheduler cfq registered (default) [ 0.891272] intel_idle: MWAIT substates: 0x3020220 [ 0.891284] intel_idle: v0.4 model 0x1C [ 0.891288] intel_idle: lapic_timer_reliable_states 0x2 [ 0.891311] Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 0.891394] ERST: Table is not found! [ 0.891397] GHES: HEST is not enabled! [ 0.891424] isapnp: Scanning for PnP cards... [ 1.245601] isapnp: No Plug & Play device found [ 1.245779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.266210] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.289097] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.300619] Linux agpgart interface v0.103 [ 1.301026] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.303062] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.303078] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.303373] mousedev: PS/2 mouse device common for all mice [ 1.303461] rtc_cmos 00:07: RTC can wake from S4 [ 1.303617] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.303646] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.303841] cpuidle: using governor ladder [ 1.304162] cpuidle: using governor menu [ 1.304642] TCP cubic registered [ 1.304741] NET: Registered protocol family 10 [ 1.305907] Mobile IPv6 [ 1.305913] NET: Registered protocol family 17 [ 1.305922] Registering the dns_resolver key type [ 1.305966] Using IPI No-Shortcut mode [ 1.306269] PM: Hibernation image not present or could not be loaded. [ 1.306290] registered taskstats version 1 [ 1.311666] rtc_cmos 00:07: setting system clock to 2011-11-25 18:51:58 UTC (1322247118) [ 1.311766] Initializing network drop monitor service [ 1.311990] Freeing unused kernel memory: 404k freed [ 1.312405] Write protecting the kernel text: 2768k [ 1.312470] Write protecting the kernel read-only data: 1088k [ 1.312475] NX-protecting the kernel data: 3376k [ 1.343030] udev[49]: starting version 164 [ 1.478652] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.478722] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.478779] r8169 0000:02:00.0: setting latency timer to 64 [ 1.478850] r8169 0000:02:00.0: irq 40 for MSI/MSI-X [ 1.481268] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.481276] ACPI: Thermal Zone [TZ00] (0 C) [ 1.486925] sdhci: Secure Digital Host Controller Interface driver [ 1.486933] sdhci: Copyright(c) Pierre Ossman [ 1.487701] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:811c] (rev 7) [ 1.487740] sdhci-pci 0000:00:1e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.487796] sdhci-pci 0000:00:1e.0: setting latency timer to 64 [ 1.487838] mmc0: no vmmc regulator found [ 1.487909] Registered led device: mmc0:: [ 1.489296] ACPI: Invalid active0 threshold [ 1.496229] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.496237] ACPI: Thermal Zone [TZ01] (0 C) [ 1.501989] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA [ 1.502041] sdhci-pci 0000:00:1e.1: SDHCI controller found [8086:811d] (rev 7) [ 1.502086] sdhci-pci 0000:00:1e.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.502153] sdhci-pci 0000:00:1e.1: setting latency timer to 64 [ 1.502206] mmc1: no vmmc regulator found [ 1.502305] Registered led device: mmc1:: [ 1.502407] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA [ 1.502435] sdhci-pci 0000:00:1e.2: SDHCI controller found [8086:811e] (rev 7) [ 1.502467] sdhci-pci 0000:00:1e.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.502512] sdhci-pci 0000:00:1e.2: setting latency timer to 64 [ 1.502553] mmc2: no vmmc regulator found [ 1.502626] Registered led device: mmc2:: [ 1.502713] mmc2: SDHCI controller on PCI [0000:00:1e.2] using DMA [ 1.509507] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf82c2000, 00:01:c0:08:aa:31, XID 1c4000c0 IRQ 40 [ 1.509569] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.509633] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.509691] r8169 0000:03:00.0: setting latency timer to 64 [ 1.509765] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.511188] r8169 0000:03:00.0: eth1: RTL8168c/8111c at 0xf82d0000, 00:01:c0:08:aa:32, XID 1c4000c0 IRQ 41 [ 1.530205] usbcore: registered new interface driver usbfs [ 1.530269] usbcore: registered new interface driver hub [ 1.531713] usbcore: registered new device driver usb [ 1.533545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.533615] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.533653] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.533662] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.533760] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.533819] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.537730] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.547368] SCSI subsystem initialized [ 1.550230] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd8014000 [ 1.563464] libata version 3.00 loaded. [ 1.567906] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.567974] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.567983] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.567990] usb usb1: Product: EHCI Host Controller [ 1.567996] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd [ 1.568038] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.568390] hub 1-0:1.0: USB hub found [ 1.568411] hub 1-0:1.0: 8 ports detected [ 1.568625] pata_sch 0000:00:1f.1: version 0.2 [ 1.568740] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 1.571892] uhci_hcd: USB Universal Host Controller Interface driver [ 1.571996] scsi0 : pata_sch [ 1.572298] scsi1 : pata_sch [ 1.573140] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.573151] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.573799] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.573822] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.573832] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.573869] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.573945] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 1.574048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.574056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.574063] usb usb2: Product: UHCI Host Controller [ 1.574069] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd [ 1.574075] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.574479] hub 2-0:1.0: USB hub found [ 1.574496] hub 2-0:1.0: 2 ports detected [ 1.574691] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.574713] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.574721] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.574753] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.574825] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 1.574931] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.574940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.574947] usb usb3: Product: UHCI Host Controller [ 1.574953] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd [ 1.574960] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.575295] hub 3-0:1.0: USB hub found [ 1.575311] hub 3-0:1.0: 2 ports detected [ 1.575518] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.575540] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.575548] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.575575] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.575627] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 1.575727] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.575735] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.575742] usb usb4: Product: UHCI Host Controller [ 1.575748] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd [ 1.575754] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.576170] hub 4-0:1.0: USB hub found [ 1.576186] hub 4-0:1.0: 2 ports detected [ 1.741335] ata1.00: ATA-8: Hitachi HTE545050B9A300, PB4OC64G, max UDMA/133 [ 1.741343] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.756866] ata1.00: configured for UDMA/100 [ 1.757228] scsi 0:0:0:0: Direct-Access ATA Hitachi HTE54505 PB4O PQ: 0 ANSI: 5 [ 1.880308] usb 1-2: new high speed USB device number 2 using ehci_hcd [ 1.935640] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.935835] sd 0:0:0:0: [sda] Write Protect is off [ 1.935844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.935933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.968501] sda: sda1 sda2 sda3 [ 1.969659] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.013058] usb 1-2: New USB device found, idVendor=0409, idProduct=005a [ 2.013077] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.013535] hub 1-2:1.0: USB hub found [ 2.013682] hub 1-2:1.0: 4 ports detected [ 2.124153] usb 1-7: new high speed USB device number 3 using ehci_hcd [ 2.274490] usb 1-7: New USB device found, idVendor=148f, idProduct=3070 [ 2.274508] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.274521] usb 1-7: Product: 802.11 n WLAN [ 2.274531] usb 1-7: Manufacturer: Ralink [ 2.274541] usb 1-7: SerialNumber: 1.0 [ 2.364203] usb 1-2.4: new low speed USB device number 4 using ehci_hcd [ 2.529085] PM: Starting manual resume from disk [ 2.529092] PM: Hibernation image partition 8:2 present [ 2.529095] PM: Looking for hibernation image. [ 2.529523] PM: Image not found (code -22) [ 2.529533] PM: Hibernation image not present or could not be loaded. [ 2.538623] usb 1-2.4: New USB device found, idVendor=0557, idProduct=2213 [ 2.538633] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.538640] usb 1-2.4: Product: CS1784 [ 2.538646] usb 1-2.4: Manufacturer: ATEN [ 2.583502] input: ATEN CS1784 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.0/input/input0 [ 2.583746] generic-usb 0003:0557:2213.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN CS1784] on usb-0000:00:1d.7-2.4/input0 [ 2.608134] input: ATEN CS1784 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.1/input/input1 [ 2.608685] generic-usb 0003:0557:2213.0002: input,hidraw1: USB HID v1.00 Mouse [ATEN CS1784] on usb-0000:00:1d.7-2.4/input1 [ 2.609120] usbcore: registered new interface driver usbhid [ 2.609127] usbhid: USB HID core driver [ 2.687250] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 4.741908] udev[279]: starting version 164 [ 5.389558] ACPI: AC Adapter [ADP1] (on-line) [ 5.397846] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.491364] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 5.491380] ACPI: Power Button [PWRB] [ 5.491584] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.491595] ACPI: Power Button [PWRF] [ 5.491608] ACPI Error: Could not enable PowerButton event (20110623/evxfevnt-198) [ 5.491619] ACPI Warning: Could not enable fixed event 0x2 (20110623/evxface-197) [ 5.492699] ACPI: acpi_idle yielding to intel_idle [ 5.496593] ACPI: Battery Slot [BAT0] (battery absent) [ 5.496665] ACPI: Battery Slot [BAT1] (battery absent) [ 5.496731] ACPI: Battery Slot [BAT2] (battery absent) [ 5.512217] button: probe of LNXPWRBN:00 failed with error -22 [ 6.192799] [drm] Initialized drm 1.1.0 20060810 [ 6.398641] cfg80211: Calling CRDA to update world regulatory domain [ 6.410743] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.410820] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6.442429] psb_gfx: module is from the staging directory, the quality is unknown, you have been warned. [ 6.680099] usb 1-7: reset high speed USB device number 3 using ehci_hcd [ 6.733797] hda_codec: ALC662 rev1: SKU not ready 0x411111f0 [ 6.733974] hda_codec: ALC662 rev1: BIOS auto-probing. [ 6.736238] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 6.740073] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 6.740521] gma500 0000:00:02.0: irq 42 for MSI/MSI-X [ 6.740547] gma500 0000:00:02.0: setting latency timer to 64 [ 6.741608] ioremap error for 0x7f6bc000-0x7f6bf000, requested 0x10, got 0x0 [ 6.741832] Stolen memory information [ 6.741838] base in RAM: 0x7f800000 [ 6.741844] size: 8060K, calculated by (GTT RAM base) - (Stolen base), seems wrong [ 6.741851] the correct size should be: 8M(dvmt mode=3) [ 6.746400] Set up 2015 stolen pages starting at 0x7f800000, GTT offset 0K [ 6.746611] [drm] SGX core id = 0x01130000 [ 6.746617] [drm] SGX core rev major = 0x01, minor = 0x02 [ 6.746622] [drm] SGX core rev maintenance = 0x01, designer = 0x00 [ 6.760670] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 6.860439] acpi device:05: registered as cooling_device2 [ 6.887378] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.888815] Registered led device: rt2800usb-phy0::radio [ 6.888876] Registered led device: rt2800usb-phy0::assoc [ 6.888939] Registered led device: rt2800usb-phy0::quality [ 6.889308] usbcore: registered new interface driver rt2800usb [ 6.912335] acpi device:06: registered as cooling_device3 [ 6.912571] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 6.914238] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.914310] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.914317] [drm] No driver support for vblank timestamp query. [ 7.662989] Raw EDID: [ 7.663049] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663107] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663165] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663223] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663281] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663340] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663398] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663456] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7.663519] gma500 0000:00:02.0: LVDS-1: EDID block 0 invalid. [ 8.767794] Raw EDID: [ 8.767855] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.767914] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.767972] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.768044] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.768103] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.768161] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.768219] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.768277] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 8.768360] gma500 0000:00:02.0: LVDS-1: EDID block 0 invalid. [ 8.815204] gma500 0000:00:02.0: allocated 1024x768 fb [ 8.815417] fbcon: psbfb (fb0) is primary device [ 9.232666] Console: switching to colour frame buffer device 128x48 [ 9.240527] fb0: psbfb frame buffer device [ 9.240531] drm: registered panic notifier [ 9.240649] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 9.742607] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1 across:3906556k [ 9.750324] EXT4-fs (sda3): re-mounted. Opts: (null) [ 10.057456] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 10.234073] loop: module loaded [ 12.301100] r8169 0000:02:00.0: eth0: link down [ 12.301111] r8169 0000:02:00.0: eth0: link down [ 12.301472] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.362930] r8169 0000:03:00.0: eth1: link down [ 12.363283] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.257357] fuse init (API version 7.17) [ 14.703194] r8169 0000:02:00.0: eth0: link up [ 14.703643] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.071333] powernow: This module only works with AMD K7 CPUs [ 19.507419] RPC: Registered named UNIX socket transport module. [ 19.507428] RPC: Registered udp transport module. [ 19.507433] RPC: Registered tcp transport module. [ 19.507438] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.888810] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 20.133026] svc: failed to register lockdv1 RPC service (errno 97). [ 20.133120] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 20.285313] NFSD: starting 90-second grace period [ 21.383782] cpufreq-nforce2: No nForce2 chipset. [ 52.780952] sshd (2039): /proc/2039/oom_adj is deprecated, please use /proc/2039/oom_score_adj instead. [ 368.616485] r8169 0000:02:00.0: eth0: link up [ 371.416315] r8169 0000:02:00.0: eth0: link up [ 398.212472] r8169 0000:02:00.0: eth0: link up [ 445.948345] r8169 0000:02:00.0: eth0: link up [ 503.456422] r8169 0000:02:00.0: eth0: link up [ 520.916484] r8169 0000:02:00.0: eth0: link up [ 528.624334] r8169 0000:02:00.0: eth0: link up [ 530.824466] r8169 0000:02:00.0: eth0: link up [ 531.356288] r8169 0000:02:00.0: eth0: link up [ 552.028334] r8169 0000:02:00.0: eth0: link up [ 553.943062] ------------[ cut here ]------------ [ 553.943102] WARNING: at /build/buildd-linux-2.6_3.1.1-1-i386-6vi5gY/linux-2.6-3.1.1/debian/build/source_i386_none/net/core/dev.c:3827 net_rx_action+0xda/0x17e() [ 553.943117] Hardware name: CM-iAM/SBC-FITPC2i [ 553.943123] Modules linked in: cpufreq_userspace cpufreq_conservative cpufreq_stats nfsd lockd nfs_acl auth_rpcgss sunrpc speedstep_lib cpufreq_powersave fuse ext2 coretemp acpi_cpufreq mperf loop arc4 snd_hda_codec_realtek rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 psb_gfx(C) snd_hda_intel cfg80211 snd_hda_codec drm_kms_helper i2c_isch drm snd_hwdep rfkill tpm_tis tpm tpm_bios lpc_sch mfd_core evdev snd_pcm snd_seq snd_timer snd_seq_device battery processor button psmouse snd pcspkr serio_raw ac i2c_algo_bit power_supply i2c_core soundcore snd_page_alloc video usbhid ext4 hid mbcache jbd2 crc16 sd_mod crc_t10dif ata_generic uhci_hcd pata_sch libata ehci_hcd scsi_mod usbcore sdhci_pci sdhci r8169 mii thermal thermal_sys mmc_core [last unloaded: scsi_wait_scan] [ 553.943358] Pid: 0, comm: swapper Tainted: G C 3.1.0-1-686-pae #1 [ 553.943367] Call Trace: [ 553.943389] [<c1037698>] ? warn_slowpath_common+0x68/0x79 [ 553.943404] [<c120d061>] ? net_rx_action+0xda/0x17e [ 553.943418] [<c10376b6>] ? warn_slowpath_null+0xd/0x10 [ 553.943432] [<c120d061>] ? net_rx_action+0xda/0x17e [ 553.943446] [<c103c05d>] ? local_bh_enable+0x2/0x2 [ 553.943458] [<c103c0f1>] ? __do_softirq+0x94/0x12f [ 553.943471] [<c103c05d>] ? local_bh_enable+0x2/0x2 [ 553.943479] <IRQ> [<c103c2e2>] ? irq_exit+0x32/0x80 [ 553.943502] [<c100ca6e>] ? do_IRQ+0x65/0x76 [ 553.943518] [<c12b2a30>] ? common_interrupt+0x30/0x38 [ 553.943532] [<c103007b>] ? sched_debug_show+0x165/0xb17 [ 553.943548] [<c118519b>] ? intel_idle+0xb9/0xde [ 553.943564] [<c11f54d2>] ? cpuidle_idle_call+0xcd/0x140 [ 553.943578] [<c100aef1>] ? cpu_idle+0x86/0xaa [ 553.943591] [<c143e708>] ? start_kernel+0x32a/0x32f [ 553.943600] ---[ end trace 6d03368d0e01d4ae ]--- [ 553.956445] r8169 0000:02:00.0: eth0: link up [ 562.208343] r8169 0000:02:00.0: eth0: link up [ 604.580479] r8169 0000:02:00.0: eth0: link up [ 604.888437] r8169 0000:02:00.0: eth0: link up [ 773.104314] r8169 0000:02:00.0: eth0: link up [ 784.480214] r8169 0000:02:00.0: eth0: link up [ 798.628302] r8169 0000:02:00.0: eth0: link up [ 802.404329] r8169 0000:02:00.0: eth0: link up
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Fri, 25 Nov 2011 20:24:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Fri, 25 Nov 2011 20:24:03 GMT) (full text, mbox, link).
Message #39 received at 642911@bugs.debian.org (full text, mbox, reply):
found 642911 linux-2.6/2.6.32-39 found 642911 linux-2.6/3.1.1-1 forwarded 642911 http://thread.gmane.org/gmane.linux.network/212958 quit booster@wolke7.net wrote: > All the squeeze kernels cause the same hang during high load at the network. > Today I installed the 3.1 kernel and did some testing by copying files > with samba. > The problem still exists and is even worse: Now the CPU hangs during the > interrupts: Thanks much. Let's take this upstream.
Bug Marked as found in versions linux-2.6/2.6.32-39.
Request was from Jonathan Nieder <jrnieder@gmail.com>
to control@bugs.debian.org.
(Fri, 25 Nov 2011 20:24:05 GMT) (full text, mbox, link).
Bug Marked as found in versions linux-2.6/3.1.1-1.
Request was from Jonathan Nieder <jrnieder@gmail.com>
to control@bugs.debian.org.
(Fri, 25 Nov 2011 20:24:06 GMT) (full text, mbox, link).
Set Bug forwarded-to-address to 'http://thread.gmane.org/gmane.linux.network/212958'.
Request was from Jonathan Nieder <jrnieder@gmail.com>
to control@bugs.debian.org.
(Fri, 25 Nov 2011 20:24:06 GMT) (full text, mbox, link).
Removed tag(s) moreinfo.
Request was from Jonathan Nieder <jrnieder@gmail.com>
to control@bugs.debian.org.
(Fri, 25 Nov 2011 21:00:02 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Wed, 11 Jan 2012 16:21:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Wed, 11 Jan 2012 16:21:03 GMT) (full text, mbox, link).
Message #52 received at 642911@bugs.debian.org (full text, mbox, reply):
Hi Gerd,
booster@wolke7.net wrote:
> All the squeeze kernels cause the same hang during high load at the network.
> Today I installed the 3.1 kernel and did some testing by copying files
> with samba.
> The problem still exists and is even worse: Now the CPU hangs during the
> interrupts:
Something very similar to the fix you tested plus a couple more r8169
fixes were applied upstream:
- v3.2-rc5~38^2~5 (r8169: Rx FIFO overflow fixes, 2011-12-04), which
is the fix you helped with
- v3.2-rc5~38^2~4 (r8169: fix Rx index race between FIFO overflow
recovery and NAPI handler, 2011-12-04)
- v3.2-rc7~12^2~8 (r8169: fix Config2 MSIEnable bit setting,
2011-12-15)
Am I correct in guessing that v3.2-rc7 from experimental works ok?
I'd like to see this fixed in the upstream 3.0.y longterm branch,
since it should make it easier to share work on maintaining 3.2.y. It
would also be useful to fix this in squeeze; conveniently enough, the
current r8169 driver in squeeze is based on the version in v3.0.2.
If you have time for it, please test the fix on top of the 3.0.y
branch. It works like this:
1. If you still have a clone of Linus's kernel repository:
# enter it
cd linux
# grab the stable and longterm branches on top
git remote add -f stable \
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
Otherwise:
# grab a copy of the stable and longterm branches
git clone -o stable \
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git \
linux
# enter it
cd linux
2. git checkout -f stable/linux-3.0.y
git am -3 $HOME/downloads/0001-r8169-Rx-FIFO-overflow-fixes.patch
make localmodconfig; # minimal configuration
# or:
make silentoldconfig; # reuse configuration
make deb-pkg; # pass -j<number of processors> for parallel build
dpkg -i ../<name of package>
reboot
As always, if you have any questions, feel free to ask.
Thanks again for your work on this.
Sincerely,
Jonathan
Added tag(s) upstream, moreinfo, and patch.
Request was from Jonathan Nieder <jrnieder@gmail.com>
to control@bugs.debian.org.
(Wed, 11 Jan 2012 16:21:09 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Wed, 11 Jan 2012 18:03:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Wed, 11 Jan 2012 18:03:03 GMT) (full text, mbox, link).
Message #59 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Jonathan Nieder wrote: > If you have time for it, please test the fix on top of the 3.0.y > branch. It works like this: [...] > 2. git checkout -f stable/linux-3.0.y > git am -3 $HOME/downloads/0001-r8169-Rx-FIFO-overflow-fixes.patch > > make localmodconfig; # minimal configuration > # or: > make silentoldconfig; # reuse configuration > > make deb-pkg; # pass -j<number of processors> for parallel build It would have been more helpful if I had included a copy of the patch. :) Here it is.
[0001-r8169-Rx-FIFO-overflow-fixes.patch (text/plain, attachment)]
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Sun, 12 Feb 2012 17:21:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sun, 12 Feb 2012 17:21:03 GMT) (full text, mbox, link).
Message #64 received at 642911@bugs.debian.org (full text, mbox, reply):
Hi again, Jonathan Nieder wrote: > Something very similar to the fix you tested plus a couple more r8169 > fixes were applied upstream: > > - v3.2-rc5~38^2~5 (r8169: Rx FIFO overflow fixes, 2011-12-04), which > is the fix you helped with > - v3.2-rc5~38^2~4 (r8169: fix Rx index race between FIFO overflow > recovery and NAPI handler, 2011-12-04) > - v3.2-rc7~12^2~8 (r8169: fix Config2 MSIEnable bit setting, > 2011-12-15) Thanks again for making it happen. > Am I correct in guessing that v3.2-rc7 from experimental works ok? What kernel do you use these days? Have you tried 3.2.y from sid/experimental? Would you be interested in pursuing a fix in 2.6.32.y or 3.0.y? Jonathan
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Sun, 19 Feb 2012 15:33:11 GMT) (full text, mbox, link).
Acknowledgement sent
to booster@wolke7.net:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sun, 19 Feb 2012 15:33:11 GMT) (full text, mbox, link).
Message #69 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/html, inline)]
Reply sent
to Jonathan Nieder <jrnieder@gmail.com>:
You have taken responsibility.
(Mon, 20 Feb 2012 02:21:12 GMT) (full text, mbox, link).
Notification sent
to booster@wolke7.net:
Bug acknowledged by developer.
(Mon, 20 Feb 2012 02:21:12 GMT) (full text, mbox, link).
Message #74 received at 642911-done@bugs.debian.org (full text, mbox, reply):
Version: 3.2.6-1 Hi, Gerd wrote: > Today I updated to the latest sid kernel (3.2.0-1-686-pae #1 SMP Fri > Feb 17 06:27:21 UTC 2012)<br> > The first tests I've done so far by transfering ~30 GB with samba > showed no more error messages in<br> > the logs and the eth0 interface is stable. I'll keep the system up and > running to see if all works OK.<br> Thanks for checking. Marking accordingly. > <br> > If there are any backports of the fix to the 3.0 and 2.6 kernels I can > test them as well if you like.<br> Excellent. Will respond in a separate message. > The only thing that's currently not working is the green transfer LED > when the connection is to my GBit<br> > switch. If the connection is to an 100MBit switch the LED is working as > expected.<br> Feel free to file a separate bug (severity 'minor') if you'd like to pursue that, and we can try to get it fixed. Thanks, Jonathan
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Mon, 20 Feb 2012 02:51:04 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 20 Feb 2012 02:51:04 GMT) (full text, mbox, link).
Message #79 received at 642911@bugs.debian.org (full text, mbox, reply):
booster@wolke7.net wrote: > If there are any backports of the fix to the 3.0 and 2.6 kernels I can > test them as well if you like. Thanks again for the offer. Backporting the fix to 3.0.y is straightforward; I haven't tried 2.6.32.y yet. Followed up upstream --- it would be best if we can do this with François's cooperation, since as maintainer he is less likely to miss something important.
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Mon, 20 Feb 2012 04:39:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Ben Hutchings <ben@decadent.org.uk>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 20 Feb 2012 04:39:03 GMT) (full text, mbox, link).
Message #84 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
On Sun, 2012-02-19 at 20:45 -0600, Jonathan Nieder wrote: > booster@wolke7.net wrote: > > > If there are any backports of the fix to the 3.0 and 2.6 kernels I can > > test them as well if you like. > > Thanks again for the offer. Backporting the fix to 3.0.y is > straightforward; I haven't tried 2.6.32.y yet. Followed up upstream > --- it would be best if we can do this with François's cooperation, > since as maintainer he is less likely to miss something important. A backport to 3.0.y is good enough for Debian's purposes since squeeze now has r8169 from 3.0.2. It would be good to have a fix in 2.6.32.y longterm as well, but that's not something we need to be directly concerned about. Ben. -- Ben Hutchings If at first you don't succeed, you're doing about average.
[signature.asc (application/pgp-signature, inline)]
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Mon, 20 Feb 2012 06:18:04 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 20 Feb 2012 06:18:04 GMT) (full text, mbox, link).
Message #89 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Ben Hutchings wrote: > A backport to 3.0.y is good enough for Debian's purposes since squeeze > now has r8169 from 3.0.2. Oh! Thanks for the hint. Here's a rough backport of the patch to Greg's linux-3.0.y branch and split into 4 pieces, with an explanation involving some guesswork for each. I suspect the combination will work, but I easily could have misunderstood some of the patches, so at least some details of the explanations are probably wrong. I would be particularly interested to hear if the patches seem sane and work and if the effect of patch 4/4 is noticeable. The patches seem to apply to Debian squeeze without trouble, too, in case that's easier to test. Thoughts of all kinds welcome, as always. r8169: ignore masked events in the irq handler r8169: mask RxFIFOOver interruption for 8168c, 8105e, and newer chips r8169: remove now-redundant case statements in rtl8169_interrupt r8169: use event mask when disabling interrupts drivers/net/r8169.c | 54 ++++++++++++++++++++++---------------------------- 1 files changed, 24 insertions(+), 30 deletions(-)
[0001-r8169-ignore-masked-events-in-the-irq-handler.patch (text/plain, attachment)]
[0002-r8169-mask-RxFIFOOver-interruption-for-8168c-8105e-a.patch (text/plain, attachment)]
[0003-r8169-remove-now-redundant-case-statements-in-rtl816.patch (text/plain, attachment)]
[0004-r8169-use-event-mask-when-disabling-interrupts.patch (text/plain, attachment)]
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Mon, 20 Feb 2012 23:30:08 GMT) (full text, mbox, link).
Acknowledgement sent
to Francois Romieu <romieu@fr.zoreil.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 20 Feb 2012 23:30:08 GMT) (full text, mbox, link).
Message #94 received at 642911@bugs.debian.org (full text, mbox, reply):
Jonathan Nieder <jrnieder@gmail.com> : [...] > From: Jonathan Nieder <jrnieder@gmail.com> > Subject: r8169: use event mask when disabling interrupts > > [ Extracted from commit 811fd3010cf512f2e23e6c4c912aad54516dc706 > upstream, which was written by François Romieu. ] > > Not sure what this one is about, to be honest. It's part of the "no processing" policy: the driver only acks what it cares about. -- Ueimor
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Mon, 20 Feb 2012 23:48:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 20 Feb 2012 23:48:03 GMT) (full text, mbox, link).
Message #99 received at 642911@bugs.debian.org (full text, mbox, reply):
Francois Romieu wrote:
> It's part of the "no processing" policy: the driver only acks what
> it cares about.
While you're here, a few more questions. ;-) No more after these,
I promise.
- Is the PCI commit after writing to IntrStatus needed in the
context of 3.0.y which does not have 92fc43b4159b ("r8169: modify
the flow of the hw reset") but does call irq_mask_and_ack from time
to time without a PCI commit immediately afterward? What symptoms
does it address?
- Does init_one need the same "don't ack uninteresting events" change
(0xffff -> tp->intr_event)?
- Am I understanding correctly that patch 3/4 (remove now-redundant
case statements) is a code cleanup / no-op?
Thanks very much for your help.
Jonathan
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Tue, 21 Feb 2012 00:18:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Jonathan Nieder <jrnieder@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Tue, 21 Feb 2012 00:18:03 GMT) (full text, mbox, link).
Message #104 received at 642911@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Hi, Gerd, Lucas, can you test the attached patch? It works like this: # prerequisites apt-get install git build-essential kernelrepos=git://git.kernel.org/pub/scm/linux/kernel/git/ # get the Linux kernel if you don't already have it git clone $kernelrepos/torvalds/linux.git # enter Linux kernel repository cd linux # fetch point releases git remote add -f stable $kernelrepos/stable/linux-stable.git # try 3.0.y git reset --hard git checkout stable/linux-3.0.y make localmodconfig make deb-pkg; # optionally with -j<num> for parallel build dpkg -i ../<name of package> reboot ... test test test ...; # hopefully it gives hangs or transmit timeouts # test with patch git am -3sc thepatch make deb-pkg; # maybe with -j4 dpkg -i ../<name of package> reboot ... test test test ... Results from testing the squeeze kernel following instructions from [1] would also be interesting. Thanks to Sioçnarf for hints. Hopeful, Jonathan [1] http://kernel-handbook.alioth.debian.org/ch-common-tasks.html or the corresponding page in the debian-kernel-handbook package
[r8169-Rx-FIFO-overflow-fixes.patch (text/plain, attachment)]
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#642911; Package linux-2.6.
(Tue, 21 Feb 2012 22:15:57 GMT) (full text, mbox, link).
Acknowledgement sent
to Francois Romieu <romieu@fr.zoreil.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Tue, 21 Feb 2012 22:15:57 GMT) (full text, mbox, link).
Message #109 received at 642911@bugs.debian.org (full text, mbox, reply):
Jonathan Nieder <jrnieder@gmail.com> :
[...]
> - Is the PCI commit after writing to IntrStatus needed in the
> context of 3.0.y which does not have 92fc43b4159b ("r8169: modify
> the flow of the hw reset") but does call irq_mask_and_ack from time
> to time without a PCI commit immediately afterward? What symptoms
> does it address?
MMIO writes are posted. One can only say that the write will be committed
somewhere between the time it is requested and the next MMIO read for
this register range.
> - Does init_one need the same "don't ack uninteresting events" change
> (0xffff -> tp->intr_event)?
No. Init is different. It happens once and the driver is only in control
afterwards.
> - Am I understanding correctly that patch 3/4 (remove now-redundant
> case statements) is a code cleanup / no-op?
Yes.
--
Ueimor
Bug archived.
Request was from Debbugs Internal Request <owner@bugs.debian.org>
to internal_control@bugs.debian.org.
(Sun, 08 Jul 2012 07:37:21 GMT) (full text, mbox, link).
Send a report that this bug log contains spam.
Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.