Skip to content
Commits on Source (23)
Expand all Hide whitespace changes
Inline Side-by-side
Makefile.in
View file @ 395a0363
# Makefile.in generated by automake 1.13.1 from Makefile.am.
# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2012 Free Software Foundation, Inc.
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
......@@ -16,23 +16,61 @@
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
test $$am__dry = yes; \
}
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
......@@ -51,14 +89,12 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
bin_PROGRAMS = xdg-user-dirs-gtk-update$(EXEEXT) $(am__EXEEXT_1)
subdir = .
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in depcomp AUTHORS COPYING ChangeLog \
INSTALL NEWS README install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
......@@ -88,7 +124,8 @@ am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/parse.Po ./$(DEPDIR)/update.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
......@@ -152,9 +189,9 @@ am__recursive_targets = \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
......@@ -171,10 +208,10 @@ am__define_uniq_tagged_files = \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
COPYING ChangeLog INSTALL NEWS README compile depcomp \
install-sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
......@@ -213,6 +250,8 @@ am__relativize = \
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
......@@ -232,6 +271,8 @@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
......@@ -239,12 +280,11 @@ DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
INSTALL = @INSTALL@
......@@ -262,6 +302,7 @@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
......@@ -333,6 +374,7 @@ pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
......@@ -390,15 +432,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
......@@ -411,8 +452,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then rm -f stamp-h1; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
......@@ -466,6 +507,7 @@ uninstall-binPROGRAMS:
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
xdg-user-dirs-gtk-update$(EXEEXT): $(xdg_user_dirs_gtk_update_OBJECTS) $(xdg_user_dirs_gtk_update_DEPENDENCIES) $(EXTRA_xdg_user_dirs_gtk_update_DEPENDENCIES)
@rm -f xdg-user-dirs-gtk-update$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(xdg_user_dirs_gtk_update_OBJECTS) $(xdg_user_dirs_gtk_update_LDADD) $(LIBS)
......@@ -476,22 +518,28 @@ mostlyclean-compile:
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/update.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/update.Po@am__quote@ # am--include-marker
$(am__depfiles_remade):
@$(MKDIR_P) $(@D)
@echo '# dummy' >$@-t && $(am__mv) $@-t $@
am--depfiles: $(am__depfiles_remade)
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
install-autostartDATA: $(autostart_DATA)
@$(NORMAL_INSTALL)
@list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
......@@ -521,13 +569,12 @@ uninstall-autostartDATA:
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
......@@ -620,8 +667,10 @@ cscopelist-am: $(am__tagged_files)
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir: $(DISTFILES)
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
......@@ -686,7 +735,7 @@ distdir: $(DISTFILES)
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
......@@ -700,12 +749,22 @@ dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
......@@ -723,7 +782,7 @@ dist dist-all:
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
......@@ -733,24 +792,27 @@ distcheck: dist
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
......@@ -847,7 +909,8 @@ clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f ./$(DEPDIR)/parse.Po
-rm -f ./$(DEPDIR)/update.Po
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-tags
......@@ -895,7 +958,8 @@ installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f ./$(DEPDIR)/parse.Po
-rm -f ./$(DEPDIR)/update.Po
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
......@@ -916,22 +980,25 @@ uninstall-am: uninstall-autostartDATA uninstall-binPROGRAMS
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-binPROGRAMS \
clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \
dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-autostartDATA install-binPROGRAMS install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-autostartDATA uninstall-binPROGRAMS
am--depfiles am--refresh check check-am clean \
clean-binPROGRAMS clean-cscope clean-generic cscope \
cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
dist-zstd distcheck distclean distclean-compile \
distclean-generic distclean-hdr distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-autostartDATA \
install-binPROGRAMS install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-am \
uninstall-autostartDATA uninstall-binPROGRAMS
.PRECIOUS: Makefile
@INTLTOOL_DESKTOP_RULE@
......
NEWS
View file @ 395a0363
Major changes in 0.11 are:
* Translation updates
Major changes in 0.10 are:
* Use new location for GTK+ bookmarks file
......
aclocal.m4
View file @ 395a0363
This diff is collapsed.
compile 0 → 100755
View file @ 395a0363
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN* | MSYS*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/* | msys/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
config.h.in
View file @ 395a0363
......@@ -12,6 +12,14 @@
/* Define to 1 if you have the `bind_textdomain_codeset' function. */
#undef HAVE_BIND_TEXTDOMAIN_CODESET
/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the
CoreFoundation framework. */
#undef HAVE_CFLOCALECOPYCURRENT
/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
the CoreFoundation framework. */
#undef HAVE_CFPREFERENCESCOPYAPPVALUE
/* Define to 1 if you have the `dcgettext' function. */
#undef HAVE_DCGETTEXT
......@@ -27,12 +35,12 @@
/* Define to 1 if you have the <locale.h> header file. */
#undef HAVE_LOCALE_H
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdio.h> header file. */
#undef HAVE_STDIO_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
......@@ -72,7 +80,9 @@
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Define to 1 if you have the ANSI C header files. */
/* Define to 1 if all of the C90 standard headers exist (not just the ones
required in a freestanding environment). This macro is provided for
backward compatibility; new code need not use it. */
#undef STDC_HEADERS
/* Version number of package */
......
configure
View file @ 395a0363
This diff is collapsed.
configure.ac
View file @ 395a0363
AC_PREREQ(2.53)
AC_INIT([xdg-user-dirs-gtk], [0.10],
AC_INIT([xdg-user-dirs-gtk], [0.11],
[http://bugzilla.gnome.org/enter_bug.cgi?product=xdg-user-dirs-gtk])
AC_CONFIG_SRCDIR([parse.c])
AM_INIT_AUTOMAKE([1.9 dist-xz no-dist-gzip tar-ustar foreign])
......
depcomp
View file @ 395a0363
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2012-10-18.11; # UTC
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -16,7 +16,7 @@ scriptversion=2012-10-18.11; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
......@@ -552,6 +552,7 @@ $ {
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
......@@ -782,9 +783,9 @@ exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
install-sh
View file @ 395a0363
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2011-11-20.07; # UTC
scriptversion=2020-11-14.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
......@@ -41,19 +41,15 @@ scriptversion=2011-11-20.07; # UTC
# This script is compatible with the BSD install script, but was written
# from scratch.
tab=' '
nl='
'
IFS=" "" $nl"
IFS=" $tab$nl"
# set DOITPROG to echo to test this script
# Set DOITPROG to "echo" to test this script.
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
......@@ -68,22 +64,16 @@ mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir=
# Desired mode of installed file.
mode=0755
# Create dirs (including intermediate dirs) using mode 755.
# This is like GNU 'install' as of coreutils 8.32 (2020).
mkdir_umask=22
backupsuffix=
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
......@@ -97,7 +87,7 @@ dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
......@@ -114,18 +104,28 @@ Options:
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-C install only if different (preserve data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-p pass -p to $cpprog.
-s $stripprog installed files.
-S SUFFIX attempt to back up existing files, with suffix SUFFIX.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
By default, rm is invoked with -f; when overridden with RMPROG,
it's up to you to specify -f if you want it.
If -S is not specified, no backups are attempted.
Email bug reports to bug-automake@gnu.org.
Automake home page: https://www.gnu.org/software/automake/
"
while test $# -ne 0; do
......@@ -137,46 +137,62 @@ while test $# -ne 0; do
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
case $mode in
*' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
shift;;
-p) cpprog="$cpprog -p";;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-S) backupsuffix="$2"
shift;;
-T) no_target_directory=true;;
-t)
is_target_a_directory=always
dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
# We allow the use of options -d and -T together, by making -d
# take the precedence; this is for compatibility with GNU install.
if test -n "$dir_arg"; then
if test -n "$dst_arg"; then
echo "$0: target directory not allowed when installing a directory." >&2
exit 1
fi
fi
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
......@@ -207,6 +223,15 @@ if test $# -eq 0; then
exit 0
fi
if test -z "$dir_arg"; then
if test $# -gt 1 || test "$is_target_a_directory" = always; then
if test ! -d "$dst_arg"; then
echo "$0: $dst_arg: Is not a directory." >&2
exit 1
fi
fi
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
......@@ -223,16 +248,16 @@ if test -z "$dir_arg"; then
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
u_plus_rw=
else
u_plus_rw='% 200'
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
u_plus_rw=
else
u_plus_rw=,u+rw
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
......@@ -250,6 +275,10 @@ do
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
# Don't chown directories that already exist.
if test $dstdir_status = 0; then
chowncmd=""
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
......@@ -266,178 +295,148 @@ do
fi
dst=$dst_arg
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
# If destination is a directory, append the input filename.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstbase=`basename "$src"`
case $dst in
*/) dst=$dst$dstbase;;
*) dst=$dst/$dstbase;;
esac
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
case $dstdir in
*/) dstdirslash=$dstdir;;
*) dstdirslash=$dstdir/;;
esac
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
# The $RANDOM variable is not portable (e.g., dash). Use it
# here however when possible just to lower collision chance.
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap '
ret=$?
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
exit $ret
' 0
# Because "mkdir -p" follows existing symlinks and we likely work
# directly in world-writeable /tmp, make sure that the '$tmpdir'
# directory is successfully created first before we actually test
# 'mkdir -p'.
if (umask $mkdir_umask &&
$mkdirprog $mkdir_mode "$tmpdir" &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
test_tmpdir="$tmpdir/a"
ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
mkdir_mode=
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
trap '' 0;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set -f
set fnord $dstdir
shift
$posix_glob set +f
set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
......@@ -450,14 +449,25 @@ do
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
dsttmp=${dstdirslash}_inst.$$_
rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
(umask $cp_umask &&
{ test -z "$stripcmd" || {
# Create $dsttmp read-write so that cp doesn't create it read-only,
# which would cause strip to fail.
if test -z "$doit"; then
: >"$dsttmp" # No need to fork-exec 'touch'.
else
$doit touch "$dsttmp"
fi
}
} &&
$doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
......@@ -472,20 +482,24 @@ do
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# If $backupsuffix is set, and the file being installed
# already exists, attempt a backup. Don't worry if it fails,
# e.g., if mv doesn't support -f.
if test -n "$backupsuffix" && test -f "$dst"; then
$doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
fi
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
......@@ -493,24 +507,24 @@ do
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
......@@ -519,9 +533,9 @@ do
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
missing
View file @ 395a0363
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2012-06-26.16; # UTC
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
......@@ -17,7 +17,7 @@ scriptversion=2012-06-26.16; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
......@@ -101,9 +101,9 @@ else
exit $st
fi
perl_URL=http://www.perl.org/
flex_URL=http://flex.sourceforge.net/
gnu_software_URL=http://www.gnu.org/software
perl_URL=https://www.perl.org/
flex_URL=https://github.com/westes/flex
gnu_software_URL=https://www.gnu.org/software
program_details ()
{
......@@ -160,7 +160,7 @@ give_advice ()
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'automa4te' program to be rebuilt."
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
......@@ -207,9 +207,9 @@ give_advice "$1" | sed -e '1s/^/WARNING: /' \
exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
po/LINGUAS
View file @ 395a0363
......@@ -7,6 +7,7 @@ be
be@latin
bg
bn_IN
bs
ca
crh
cs
......@@ -20,14 +21,18 @@ eo
es
et
eu
fa
fi
fr
fur
gl
gu
he
hi
hr
hu
id
is
it
ja
ka
......@@ -40,8 +45,10 @@ lt
lv
ml
mr
ms
nb
nds
ne
nl
nn
oc
......
po/Makefile.in.in
View file @ 395a0363
......@@ -33,8 +33,7 @@ exec_prefix = @exec_prefix@
datadir = @datadir@
datarootdir = @datarootdir@
libdir = @libdir@
DATADIRNAME = @DATADIRNAME@
itlocaledir = $(prefix)/$(DATADIRNAME)/locale
localedir = @localedir@
subdir = po
install_sh = @install_sh@
# Automake >= 1.8 provides @mkdir_p@.
......@@ -80,7 +79,7 @@ INTLTOOL__v_MSGFMT_0 = @echo " MSGFMT" $@;
.po.pox:
$(MAKE) $(GETTEXT_PACKAGE).pot
$(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox
$(MSGMERGE) $* $(GETTEXT_PACKAGE).pot -o $*.pox
.po.mo:
$(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $<
......@@ -108,7 +107,7 @@ install-data-no: all
install-data-yes: all
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \
dir=$(DESTDIR)$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $$dir; \
if test -r $$lang.gmo; then \
$(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
......@@ -142,8 +141,8 @@ install-exec installcheck:
uninstall:
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
done
check: all $(GETTEXT_PACKAGE).pot
......
po/bs.po 0 → 100644
View file @ 395a0363
# Bosnian translation for bosnianuniversetranslation
# Copyright (c) 2013 Rosetta Contributors and Canonical Ltd 2013
# This file is distributed under the same license as the bosnianuniversetranslation package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2013.
#
msgid ""
msgstr ""
"Project-Id-Version: bosnianuniversetranslation\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=xdg-"
"user-dirs-gtk&keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2015-02-27 00:26+0000\n"
"PO-Revision-Date: 2013-10-15 23:58+0000\n"
"Last-Translator: Samir Ribić <Unknown>\n"
"Language-Team: Bosnian <bs@li.org>\n"
"Language: bs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2014-10-23 07:13+0000\n"
"X-Generator: Launchpad (build 17203)\n"
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "Promjena imena standardnih direktorija na trenutni jezik?"
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Prijavili ste se sa uključenim novim jezikom. Možete odabrati da automatski "
"promijenim imena nekih standardnih direktorija u vašem ličnom direktoriju "
"tako da ona budu na ovom jeziku. Moguće je promijeniti imena sljedećih "
"direktorija:"
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_Zadrži stara imena"
#: ../update.c:192
msgid "_Update Names"
msgstr "_Promijeni imena"
#: ../update.c:218
msgid "Current folder name"
msgstr "Sadašnje ime direktorija"
#: ../update.c:223
msgid "New folder name"
msgstr "Ime novog direktorija"
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr ""
"Obratite pažnju na to da sadržaj koji je u sadašnjim direktorijima neće biti "
"pomjeren u nove direktorije."
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "_Ne pitaj ponovo"
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "Javila se greška prilikom mijenjanja imena direktorija"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Ažuriranje korisničkih direktorija"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr "Promijeni imena često korišćenih direktorija na trenutni jezik"
po/ca.po
View file @ 395a0363
......@@ -7,66 +7,65 @@
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk trunk\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2007-11-05 19:20+0100\n"
"PO-Revision-Date: 2007-10-29 10:28+0200\n"
"Last-Translator: Gil Forcada <gilforcada@guifi.net>\n"
"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/xdg-user-dirs-gtk/"
"issues\n"
"POT-Creation-Date: 2022-07-12 21:08+0000\n"
"PO-Revision-Date: 2022-09-15 10:28+0200\n"
"Last-Translator: Jordi Mas i Hernàndez <jmas@softcatala.org>\n"
"Language-Team: Catalan <tradgnome@softcatala.org>\n"
"Language: ca\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../update.c:159
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "Voleu actualitzar les carpetes estàndard a l'idioma actual?"
#: ../update.c:161
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Heu entrat a la sessió amb un idioma nou. Podeu actualitzar el nom de les "
"carpetes estàndard de la carpeta d'inici a l'idioma nou. L'actualització "
"afectarà a les carpetes següents:"
"Heu entrat a la sessió amb un idioma nou. Podeu actualitzar automàticament el nom d'algunes "
"de les carpetes estàndard en la vostra carpeta d'usuari perquè coincideixin amb el nou idioma. "
"L'actualització afectarà les carpetes següents:"
#: ../update.c:164
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_Conserva'ls"
#: ../update.c:165
#: ../update.c:192
msgid "_Update Names"
msgstr "_Actualitza'ls"
#: ../update.c:190
#: ../update.c:218
msgid "Current folder name"
msgstr "Nom actual de la carpeta"
#: ../update.c:195
#: ../update.c:223
msgid "New folder name"
msgstr "Nom nou de la carpeta"
#: ../update.c:205
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr "Tingueu en compte que els continguts existents no es mouran."
#: ../update.c:212
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "_No m'ho tornis a demanar"
#: ../update.c:229
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "S'ha produït un error en actualitzar les carpetes"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Actualització de les carpetes d'usuari"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr ""
"Actualitza els noms de les carpetes comunes per a coincidir amb l'idioma "
"actual"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "User folders update"
msgstr "Actualització de les carpetes d'usuari"
#~ msgid "The update would change the following folders:"
#~ msgstr "L'actualització canviarà les carpetes següents:"
po/da.po
View file @ 395a0363
# Danish translation for xdg-user-dirs-gtk
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# Mads Lundby <lundbymads@gmail.com>, 2009.
#
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-10-13 21:52+0200\n"
"PO-Revision-Date: 2009-10-11 20:46+0100\n"
"Last-Translator: Mads Bille Lundby <lundbymads@gmail.com>\n"
"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../update.c:159
msgid "Update standard folders to current language?"
msgstr "Opdatér standardmapper til det aktuelle sprog?"
#: ../update.c:161
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Du er logget ind i et nyt sprog. Du kan automatisk opdatere navnene på nogle "
"standardmapper i din hjemmemappe, så de passer til dette sprog. Opdateringen "
"vil ændre følgende mapper:"
#: ../update.c:164
msgid "_Keep Old Names"
msgstr "_Behold gamle navne"
#: ../update.c:165
msgid "_Update Names"
msgstr "_Opdatér navne"
#: ../update.c:190
msgid "Current folder name"
msgstr "Nuværende mappenavn"
#: ../update.c:195
msgid "New folder name"
msgstr "Nyt mappenavn"
#: ../update.c:205
msgid "Note that existing content will not be moved."
msgstr "Bemærk at eksisterende indhold ikke vil blive flyttet."
#: ../update.c:212
msgid "_Don't ask me this again"
msgstr "_Spørg mig ikke om dette igen"
#: ../update.c:229
msgid "There was an error updating the folders"
msgstr "Der opstod en fejl under opdatering af mapperne"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "Update common folders names to match current locale"
msgstr ""
"Opdatér almindelige mappenavne, så de passer til det aktuelt valgte sprog"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "User folders update"
msgstr "Opdatering af brugermapper"
# Danish translation for xdg-user-dirs-gtk
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# Mads Lundby <lundbymads@gmail.com>, 2009.
# scootergrisen, 2019.
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk master\n"
"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/xdg-user-dirs-gtk/"
"issues\n"
"POT-Creation-Date: 2019-02-09 10:51+0000\n"
"PO-Revision-Date: 2019-02-19 00:00+0200\n"
"Last-Translator: scootergrisen\n"
"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "Opdatér standardmapper til det nuværende sprog?"
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Du er logget ind med et nyt sprog. Du kan opdatere navnene på nogle "
"standardmapper i din hjemmemappe automatisk, så de passer til sproget. "
"Opdateringen vil ændre følgende mapper:"
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_Behold gamle navne"
#: ../update.c:192
msgid "_Update Names"
msgstr "_Opdatér navne"
#: ../update.c:218
msgid "Current folder name"
msgstr "Nuværende mappenavn"
#: ../update.c:223
msgid "New folder name"
msgstr "Nyt mappenavn"
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr "Bemærk at eksisterende indhold ikke vil blive flyttet."
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "_Spørg mig ikke om dette igen"
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "Der opstod en fejl under opdatering af mapperne"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Opdatering af brugermapper"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr "Opdatér almindelige mappenavne, så de passer til det nuværende sprog"
po/eo.po
View file @ 395a0363
# Esperanto translation for xdg-user-dirs-gtk
# Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009
# Copyright (C) 2009 Free Software Foundation, Inc.
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# Maku < >, 2009.
# Michael MORONI < >, 2009.
# Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>, 2011.
#
# Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>, 2011, 2019.
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=xdg-"
"user-dirs-gtk&keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2011-04-18 13:31+0000\n"
"PO-Revision-Date: 2011-04-27 16:53+0200\n"
"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/xdg-user-dirs-gtk/"
"issues\n"
"POT-Creation-Date: 2018-06-10 18:55+0000\n"
"PO-Revision-Date: 2019-02-23 11:09+0200\n"
"Last-Translator: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>\n"
"Language-Team: Esperanto <ubuntu-l10n-eo@lists.launchpad.net>\n"
"Language-Team: Esperanto <gnome-eo-list@gnome.org>\n"
"Language: eo\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2011-04-27 14:44+0000\n"
"X-Generator: Launchpad (build 12915)\n"
"Plural-Forms: nplurals=2; plural=(n != 1)\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Virtaal 0.7.1\n"
#: ../update.c:159
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "Ĉu ĝisdatigi defaŭltajn dosierojn al aktuala lingvo?"
#: ../update.c:161
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
......@@ -36,39 +34,39 @@ msgstr ""
"kelkaj defaŭltaj dosierujoj en via hejma dosierujo por tute kongrui ĉi tiun "
"lingvon. La ĝisdatigo ŝanĝus la sekvajn dosierujojn:"
#: ../update.c:164
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_Teni la malnovajn nomojn"
#: ../update.c:165
#: ../update.c:192
msgid "_Update Names"
msgstr "Ĝ_isdatigi la nomojn"
#: ../update.c:190
#: ../update.c:218
msgid "Current folder name"
msgstr "Aktuala dosieruja nomo"
#: ../update.c:195
#: ../update.c:223
msgid "New folder name"
msgstr "Nova dosieruja nomo"
#: ../update.c:205
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr "Noti, ke la ekzista enhavo ne estos movita."
#: ../update.c:212
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "_Ne redemandi al mi tion"
#: ../update.c:229
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "Okazis eraro dum ĝisdatigado de la dosierujoj"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Ĝisdatigo de uzantaj dosierujoj"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr ""
"Ĝisdatigi komunajn dosierujnomojn por tute kongrui aktualan lokan lingvon"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "User folders update"
msgstr "Ĝisdatigo de uzantaj dosierujoj"
po/fa.po 0 → 100644
View file @ 395a0363
# Persian translation for xdg-user-dirs-gtk.
# Copyright (C) 2022 xdg-user-dirs-gtk's COPYRIGHT HOLDER
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# Danial Behzadi <dani.behzi@ubuntu.com>, 2022.
#
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk master\n"
"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/xdg-user-dirs-gtk/"
"issues\n"
"POT-Creation-Date: 2021-09-22 10:56+0000\n"
"PO-Revision-Date: 2022-07-13 01:32+0430\n"
"Last-Translator: \n"
"Language-Team: Persian <fa@li.org>\n"
"Language: fa\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.1\n"
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "به‌روز رسانی شاخه‌های استاندارد به زبان کنونی؟"
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"با زبان جدیدی وارد شده‌اید. می‌توانید نام‌های برخی شاخه‌های استاندارد در شاخهٔ "
"خانگیتان را برای تطابق با این زبان به صورت خودکار به‌روز کنید. به‌روز رسانی، "
"شاخه‌های زیر را تغییر خواهد داد:"
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_نگه‌داری نام‌های قدیمی"
#: ../update.c:192
msgid "_Update Names"
msgstr "_به‌روز رسانی نام‌ها"
#: ../update.c:218
msgid "Current folder name"
msgstr "نام شاخهٔ کنونی"
#: ../update.c:223
msgid "New folder name"
msgstr "نام شاخهٔ جدید"
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr "به خاطر داشته باشید که محتوا جابه‌جا نخواهد شد."
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "_دیگر پرسیده نشود"
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "خطایی هنگام به‌روز رسانی شاخه‌ها رخ داد"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "به‌روز رسانی شاخه‌های کاربر"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr "به‌روز رسانی نام شاخه‌های معمول برای تطابق با زبان کنونی"
po/fur.po 0 → 100644
View file @ 395a0363
# Friulian translation for xdg-user-dirs-gtk.
# Copyright (C) 2016 xdg-user-dirs-gtk's COPYRIGHT HOLDER
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# Fabio Tomat <f.t.public@gmail.com>, 2016.
#
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk master\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-09-23 22:30+0000\n"
"PO-Revision-Date: 2016-11-14 23:04+0100\n"
"Language-Team: Friulian <fur@li.org>\n"
"Language: fur\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Last-Translator: Fabio Tomat <f.t.public@gmail.com>\n"
"X-Generator: Poedit 1.8.8\n"
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "Inzornâ lis cartelis standard ae lenghe atuâl?"
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Tu sês jentrât doprant une gnove lenghe. Tu puedis inzornâ in automatic i "
"nons di cualchi cartele standard inte tô cartele cjase in base a cheste "
"lenghe. L'inzornament al cambiarà lis cartelis chi daurman:"
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_Ten Nons Vecjos"
#: ../update.c:192
msgid "_Update Names"
msgstr "_Inzorne Nons"
#: ../update.c:218
msgid "Current folder name"
msgstr "Non cartele atuâl"
#: ../update.c:223
msgid "New folder name"
msgstr "Gnûf non cartele"
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr "Viôt che i contignûts esistents no vignaran spostâts."
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "No stâ _domandâmal plui"
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "Si è presentât un erôr tal inzornâ lis cartelis"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Inzornament cartelis utent"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr "Inzorne i nons des cartelis ordenaris in base ae lenghe in ûs"
po/hr.po 0 → 100644
View file @ 395a0363
# Croatian translation for xdg-user-dirs-gtk
# Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2009.
#
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-09-23 22:20+0000\n"
"PO-Revision-Date: 2016-09-24 00:28+0200\n"
"Last-Translator: gogo <trebelnik2@gmail.com>\n"
"Language-Team: Croatian <hr@li.org>\n"
"Language: hr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2012-08-31 04:52+0000\n"
"X-Generator: Poedit 1.8.7.1\n"
#: ../update.c:186
msgid "Update standard folders to current language?"
msgstr "Nadopuni uobičajene mape prema trenutnom jeziku?"
#: ../update.c:188
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Prijavili ste se s novim jezikom. Možete automatski nadopuniti nazive "
"uobičajenih mapa u svojoj osobnoj mapi, kako bi odgovarali ovom jeziku. "
"Nadopuna će promijeniti sljedeće mape:"
#: ../update.c:191
msgid "_Keep Old Names"
msgstr "_Zadrži stare nazive"
#: ../update.c:192
msgid "_Update Names"
msgstr "_Nadopuni nazive"
#: ../update.c:218
msgid "Current folder name"
msgstr "Trenutni naziv mape"
#: ../update.c:223
msgid "New folder name"
msgstr "Novi naziv mape"
#: ../update.c:233
msgid "Note that existing content will not be moved."
msgstr "Znajte da postojeći sadržaj neće biti premješten."
#: ../update.c:240
msgid "_Don't ask me this again"
msgstr "_Ne pitaj me ponovno"
#: ../update.c:257
msgid "There was an error updating the folders"
msgstr "Došlo je do greške prilikom nadopuna mapa"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Nadopuna korisnikovih mapa"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr "Nadopuni nazive uobičajenih mapa kako bi odgovarali trenutnom jeziku"
po/is.po 0 → 100644
View file @ 395a0363
# Icelandic translation for xdg-user-dirs-gtk
# Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009
# This file is distributed under the same license as the xdg-user-dirs-gtk package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2009.
#
msgid ""
msgstr ""
"Project-Id-Version: xdg-user-dirs-gtk\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
"POT-Creation-Date: 2012-07-20 05:15+0000\n"
"PO-Revision-Date: 2009-09-30 16:31+0000\n"
"Last-Translator: Baldur <baldurpet@gmail.com>\n"
"Language-Team: Icelandic <is@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2012-08-31 04:56+0000\n"
"X-Generator: Launchpad (build 15887)\n"
#: ../update.c:159
msgid "Update standard folders to current language?"
msgstr "Viltu uppfæra venjulegu möppurnar í núverandi tungumál?"
#: ../update.c:161
msgid ""
"You have logged in in a new language. You can automatically update the names "
"of some standard folders in your home folder to match this language. The "
"update would change the following folders:"
msgstr ""
"Þú hefur skráð þig inn með nýju tungumáli. Það eru nokkrar möppur í "
"heimamöppunni sem þú getur uppfært á þessu tungumáli. Uppfærslan myndi "
"breyta eftirfarandi möppum:"
#: ../update.c:164
msgid "_Keep Old Names"
msgstr "_Halda gömlu nöfnunum"
#: ../update.c:165
msgid "_Update Names"
msgstr "_Uppfæra nöfnin"
#: ../update.c:191
msgid "Current folder name"
msgstr "Núverandi nafn möppu"
#: ../update.c:196
msgid "New folder name"
msgstr "Nýja nafn möppu"
#: ../update.c:206
msgid "Note that existing content will not be moved."
msgstr "Hafðu í huga að ekki verður hróflað við innihaldi mappanna."
#: ../update.c:213
msgid "_Don't ask me this again"
msgstr "_Ekki spyrja um þetta aftur"
#: ../update.c:230
msgid "There was an error updating the folders"
msgstr "Það kom upp villa við að uppfæra möppurnar"
#: ../user-dirs-update-gtk.desktop.in.h:1
msgid "User folders update"
msgstr "Uppfæra möppur notanda"
#: ../user-dirs-update-gtk.desktop.in.h:2
msgid "Update common folders names to match current locale"
msgstr "Uppfæra möppur til að passa við núverandi tungumál"